Grundoram Manual (PDF 1.7MB) - TT Technologies Inc.

More documents

Recommendations

Info

18. Use the jacking rod to remove the support ring (see Fig. 98 & Fig. 99).FIG. 98: USE JACKING ROD TOREMOVE SUPPORT RINGFIG. 99: REMOVE SUPPORT RING19. Remove the small section first, you will need to twist and turn the part to removeit from the tool (see Fig. 100). Then remove the large section (see Fig. 101).Both pieces are shown together (see Fig. 102).20. Remove the piston with a piston hook (see Fig. 103).FIG. 100: REMOVE SMALLSECTIONFIG. 101: REMOVE LARGESECTIONFIG. 102: SHOWING TWOSECTIONSFIG. 103: REMOVE PISTON WITHPISTON HOOK42 <strong>TT</strong> TECHNOLOGIES, INC.
M. Piston Assembly1. Once the piston is removed you need to insert the insertion sleeve into the toolin order to get the piston to slide back into the tool (see Fig. 104 and Fig. 105).2. Now you can replace the piston seals (see Fig. 106 & 107).3. When the piston is inserted back into the tool, then remove the insertion sleeve(see Fig. 108).FIG. 104: INSERT INSERTIONSLEEVEFIG. 105: PUSH INSERTIONSLEEVE INFIG. 106: REPLACE PISTON SEALSFIG. 107: REPLACE PISTON SEALSFIG. 108: REMOVE INSERTIONSLEEVE<strong>TT</strong> TECHNOLOGIES, INC.43
Page 9 and 10: Technical SpecificationsA. Compress
Page 11 and 12: Safe Operating PracticesA. Work Are
Page 13 and 14: Base for rammerHeight adjustmentAir
Page 15 and 16: G. Tapered Locking Ram ConesThe pur
Page 17 and 18: I. Soil PortThe soil removal cone p
Page 19: FIG. 29: GRADE BORE CUT-AWAY CUTTIN
Page 22 and 23: 8.Spoil RemovalThe following method
Page 24 and 25: 7. The soil should then be blown ou
Page 26 and 27: A. Grundoram DisassemblyNOTE: The f
Page 28 and 29: B. Piston Removal1. Remove the pist
Page 30 and 31: 3. Fit the new control stud seal in
Page 32 and 33: F. Removal and Disassembly of the C
Page 34 and 35: G. Mini-Atlas Piston Removal1. Plac
Page 36 and 37: I. Mini-Atlas Control Stud Assembly
Page 38 and 39: L. Disassembly of PCG GRUNDORAMFIG.
Page 40 and 41: FIG. 88: PLACE CARRIER CONEON TOOLF
Page 44 and 45: N. Control Stud Disassembly1. Place
Page 46 and 47: 7. Replace the black o-ring (see Fi
Page 48 and 49: 6. Once the segment ring is install
Page 50 and 51: Troubleshooting Guide10.Observation
Page 52 and 53: 12.APPENDIXAppendixA. Parts List fo
Page 54 and 55: C. Parts List for 130 Mini-AtlasIte
Page 59 and 60: H. Parts List for 260 GigantItem No
Page 61 and 62: J. Parts List for 350 KolossItem No
Page 63 and 64: L. Parts List for 600 TaurusItem No

Grundoram Manual (PDF 1.7MB) - TT Technologies Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?