Grundoram Manual (PDF 1.7MB) - TT Technologies Inc.

More documents

Recommendations

Info

H. Parts List for 260 GigantItem No Description Qty Part Number1 Machine body (front thread M 90, plug) 1 GF 260015224 Seal plug, complete, for thread M 90 1 70324926 Pulling eye (bore-D 30) M 90, complete 1 G 2660322 Piston 1 G 26001033 Piston slide tapes (set) 1 G 26001044 Piston seal 1 G 26001055-7 Control tube with elastic block and seal ring 1 GF 26001595 Control tube 1 GF 26001606 Control stud seal 1 G 26001077 Elastic block 1 GF 26001658 Support ring 1 GF 26001669 Segment ring 1 GF 260016710 Dust cap with 75x1/6" knurled thread 1 G 450011317 7' connection air hose 2", on both sides knurled threadconnection 75x1/6" 1 G 450038118 Dust plug with 75x1/6" knurled thread 1 G 450024519 Ball valve 75x1/6" knurled thread on both sides with locking nuts 1 G 450021720 Locking nut with 75x1/6" knurled thread 1 G 450011320a Locking nut with 75x1/6" knurled thread 1 G 4500113— <strong>Grundoram</strong> Gigant 260 F complete (front thread M 90, plug) 1 GF 2600005— Seals, (complete set) 1 G 2600115<strong>TT</strong> TECHNOLOGIES, INC.59
Page 9 and 10: Technical SpecificationsA. Compress
Page 11 and 12: Safe Operating PracticesA. Work Are
Page 13 and 14: Base for rammerHeight adjustmentAir
Page 15 and 16: G. Tapered Locking Ram ConesThe pur
Page 17 and 18: I. Soil PortThe soil removal cone p
Page 19: FIG. 29: GRADE BORE CUT-AWAY CUTTIN
Page 22 and 23: 8.Spoil RemovalThe following method
Page 24 and 25: 7. The soil should then be blown ou
Page 26 and 27: A. Grundoram DisassemblyNOTE: The f
Page 28 and 29: B. Piston Removal1. Remove the pist
Page 30 and 31: 3. Fit the new control stud seal in
Page 32 and 33: F. Removal and Disassembly of the C
Page 34 and 35: G. Mini-Atlas Piston Removal1. Plac
Page 36 and 37: I. Mini-Atlas Control Stud Assembly
Page 38 and 39: L. Disassembly of PCG GRUNDORAMFIG.
Page 40 and 41: FIG. 88: PLACE CARRIER CONEON TOOLF
Page 42 and 43: 18. Use the jacking rod to remove t
Page 44 and 45: N. Control Stud Disassembly1. Place
Page 46 and 47: 7. Replace the black o-ring (see Fi
Page 48 and 49: 6. Once the segment ring is install
Page 50 and 51: Troubleshooting Guide10.Observation
Page 52 and 53: 12.APPENDIXAppendixA. Parts List fo
Page 54 and 55: C. Parts List for 130 Mini-AtlasIte
Page 60 and 61: I. Parts List for 260 Mini-GigantIt
Page 62 and 63: K. Parts List for 450 GoliathItem N
Page 64: ®TT TECHNOLOGIES, Inc.2020 East Ne

Grundoram Manual (PDF 1.7MB) - TT Technologies Inc.

Create successful ePaper yourself

Delete template?

Save as template?