Copy Reference Guide - Zoom Imaging Solutions, Inc

Copy FunctionsB Adjust the horizontal ratio using [n] or [o].Note❒ Pressing [n] or [o] changes the ratio in 1% increments. Pressing andholding down [n] or [o] changes it in 10% increments.❒ If you have entered a ratio incorrectly, readjust using [n] or [o].C Adjust the vertical ratio using [n] or [o].C Place originals, and then press the {Start} key.2Directional Size Magnification (inch)Optimal reproduction ratios are automatically selected when you enter the requiredhorizontal and vertical lengths of the original and copy image.1. Horizontal original size2. Vertical original size3. Horizontal copy size4. Vertical copy sizeNote❒ Specify the vertical and horizontal sizes of the original and those of the copy,as shown in the illustration.❒ You can enter sizes within the following ranges.Metric versionInch versionVertical: 1 – 999 mm (in 1 mm increments)Horizontal: 1 – 999 mm (in 1 mm increments)Vertical: 0.1” – 99.9” (in 0.1” increments)Horizontal: 0.1” – 99.9” (in 0.1” increments)A Press [Reduce/Enlarge].B Press [Dir. Size Mag.”].41