4000 Switch Machine - Alstom
4000 Switch Machine - Alstom
4000 Switch Machine - Alstom
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Wiring ConfigurationThe machine must be configured for 3-wire (ALSTOM model 5E/5F, US&S model M23/M3),4-wire (ALSTOM model 5G/5H), or 5-wire (US&S model M23A/M23B/M3) operation via aconfiguration plug. The GM<strong>4000</strong> will not operate if the configuration plug is not installed.Speed Configuration - The default speed of the GM<strong>4000</strong> is four seconds. To configure themachine for slower speeds, install the appropriate speed select jumper located on terminal TB4,as shown in Figure 3-6.Current Configuration - The default current configuration of the GM<strong>4000</strong> is the high-currentoperation. The GM<strong>4000</strong> produces up to <strong>4000</strong> pounds of force at the end of stroke at this currentsetting. If external fuses are used to limit the current to the GM<strong>4000</strong>, they must be rated above17 amps.The GM<strong>4000</strong> can be configured for low-current operation by installing the low-current jumperon TB4. The GM<strong>4000</strong> produces up to 2800 pounds of force at the end of stroke. If externalfuses are used to limit the current to the GM<strong>4000</strong>, they must be rated above 12 amps.LOWCURRENTJUMPERTB4-1TB4-2TB4-3TB4-4TB4-5CONFIGURATIONPLUGSPEEDJUMPEROPTIONJUMPERLow Current TB4-1 to TB4-2High Current none4 sec none9 sec TB4-4 to TB4-515 sec TB4-3 to TB4-4Figure 3-6. Terminal Wiring and Configuration Plug LocationP2444, Rev. Jan/07 3-8ALSTOM Signaling Inc.
Change language