Operating and Maintaining the P80 Console - Precor

38 Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 883 / 833 / 823Connecting the Television CableThe console’s television tuner is mounted inside the console’sback plate. The tuner includes a short cable adapter thatallows the television cable to be connected outside the backplate.To connect the television cable:1. Pull the cable out through the lower right corner of theback plate.2. Route the cable counterclockwise around the outside ofthe back plate.3. Attach the connector on the cable to the connector on thetuner cable and tighten the two connectors securely usingtwo ⁷₁₆-inch open-end wrenches. Position bothconnectors above the upper right corner of the back plate.4. Use a plastic tie to secure the connectors to the top of theback plate. Pass the tie through the two small holes nearthe upper right corner of the back plate, then wrap itaround the connectors and tighten it securely. Cut off andremove the protruding end of the tie.The following illustration shows how the cable is positionedonce it is installed.Figure 25: Connecting the television cable