Operating and Maintaining the P80 Console - Precor
Operating and Maintaining the P80 Console - Precor
Operating and Maintaining the P80 Console - Precor
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Assembling <strong>the</strong> EFX 19Required Tools• #2 Phillips screwdriver• Rubber mallet• SAE st<strong>and</strong>ard hex wrench set• SAE st<strong>and</strong>ard socket set• Two ⁹₁₆-inch wrenches (open-end <strong>and</strong> box-end)• Wire cutterPerforming <strong>the</strong> AssemblyDANGERDo not attempt to connect electrical power untilall assembly procedures are complete <strong>and</strong> <strong>the</strong>console is properly installed.As you assemble <strong>the</strong> EFX, make sure to construct <strong>the</strong> cableassembly as directed so that <strong>the</strong> necessary connections areaccessible when you add <strong>the</strong> console.To begin assembly:1. Remove <strong>the</strong> lift cover <strong>and</strong> set it aside.Important: Grease on <strong>the</strong> lift screw can stain clothing. Becareful not to get grease on your clothing as you remove <strong>the</strong>lift cover. Do not remove <strong>the</strong> grease from <strong>the</strong> lift screw,because it is required for proper operation.Figure 2: Lift cover removal
Change language