DocuPrint P255 dw User Manual - Fuji Xerox Printers

• Initialize NVMPurpose:To initialize wired network data stored in Non-Volatile Memory (NVM). Enabling this feature andrebooting the printer will reset all the wired network settings to their factory default values.Values:YesNo** Factory default menu settingInitializes the wired network data stored in NVM.Does not initialize the wired network data stored in NVM.• PS Data FormatPurpose:To set the PS data communications protocol. To make any changes effective, turn off the printer andthen turn it back on.Values:Auto*StandardBCPTBCP* Factory default menu settingSets the PS data communications protocol automatically.Sets the PS data communications protocol to Standard.Sets the PS data communications protocol to BCP.Sets the PS data communications protocol to TBCP.System SettingsUse the System Settings menu to configure a variety of printer features.• Power Saving TimerPurpose:To specify a time period before the printer enter each power saver mode.Values:Low PowerTimer1min*1min - 30minSelect 1min (default) for Low Power Timer if your printer shares an electrical circuit with your roomlights and you notice them flickering. Otherwise, select a high value to keep your printer available forfrequent use with the minimum warm-up time.The printer automatically exits a power saver mode when it receives a print job from a computer.Alternatively, you can manually bring it back to the ready-to-print state by pressing the (EnergySaver) button. Whether the printer is in Low Power or Sleep mode, it will take about 25 seconds forthe printer to resume the ready-to-print state.168 Using the Operator Panel MenusBy default, the printer enters Low Power mode in one minuteof inactivity after completion of the last job. You can changethe Low Power Timer setting within a range from 1 to 30minutes.Sleep Timer 6min* By default, the printer enters Sleep mode in six minutes of6min - 11mininactivity starting from the moment it entered Low Powermode. You can change the Sleep Timer setting within arange from 6 to 11 minutes.* Factory default menu setting