DocuPrint P255 dw User Manual - Fuji Xerox Printers

• Verifying the IP SettingsThe following procedure uses Windows 7 as an example.NOTE:• The reports and lists are all printed in English.1 Print the System Settings page.2 Look under the IPv4 heading on the System Settings page to ensure that the IP address, subnetmask, and gateway address are appropriate.To verify if the printer is active on the network, run the ping command in your computer:1 Click Start, and select Search programs and files.2 Enter cmd, and then press the Enter key.A black window appears.3 Enter ping xx.xx.xx.xx (where xx.xx.xx.xx is the IP address of your printer), and then press theEnter key.4 Reply from the IP address denotes printer is active on the network.See also:• "Printing and Checking the System Settings Page" on page 56• Printing and Checking the System Settings PagePrint the System Settings page and check your printer's IP address.This section includes:• "Using the Operator Panel" on page 56• "Using the Printer Setting Utility (Windows Only)" on page 57Using the Operator PanelNOTE:• The reports and lists are all printed in English.1 Press the (Menu) button.2 Select Report/List, and then press the button.3 Select System Settings, and then press the button.The System Settings page is printed.4 Confirm the IP address next to IP Address under Wired Network (DocuPrint P255 d) or WiredNetwork/Wireless Network (DocuPrint P255 dw) on the System Settings page. If the IPaddress is 0.0.0.0, wait for a few minutes to resolve the IP address automatically, and then printthe System Settings page again.If the IP address is not resolved automatically, see "Assigning an IP Address (for IPv4 Mode)" onpage 54.56 Printer Connection and Software Installation