DocuPrint P255 dw User Manual - Fuji Xerox Printers

• Avoiding Jams• Use only recommended print media.• See "Loading Print Media in the Paper Tray" on page 126 and "Loading Print Media in the PrioritySheet Inserter (PSI)" on page 134 to load print media properly.• Do not load print media before turning on the printer.• Do not overload the print media sources.• Do not load wrinkled, creased, damp, or curled print media.• Flex, fan, and straighten print media before you load it. If a jam occurs with print media, tryfeeding one sheet at a time through the paper tray or the Priority Sheet Inserter (PSI).• Do not use print media that you have cut or trimmed.• Do not mix print media sizes, weights, or types in the same print media source.• Ensure that the recommended print surface is face up when you load print media in the papertray or the Priority Sheet Inserter (PSI).• Keep print media stored in an acceptable environment.• Do not remove the paper tray cover while printing is in progress.• Ensure that all cables that connect to the printer are correctly attached.• Overtightening the guides may cause jams.See also:• "About Print Media" on page 116• "Supported Print Media" on page 118• "Print Media Storage Guidelines" on page 117Troubleshooting 191