DocuPrint P255 dw User Manual - Fuji Xerox Printers

Enabling Non-Genuine ModeWhen toner within the toner cartridge is empty, the Replace Toner Cartridge message appears.When you want to use the printer in Non-Genuine Mode, enable Non-Genuine Mode and replace thetoner cartridge.IMPORTANT:• If you use the printer in Non-Genuine Mode, the performance of the printer may not be at its optimum. Andany problems that may arise from the use of Non-Genuine Mode are not covered by our quality guarantee.The continuous use of Non-Genuine Mode can also cause the printer to break down, and any repair chargesfor such break down will be incurred by users.NOTE:• To disable Non-Genuine Mode, select Off for Toner of Non-Genuine Mode on the operator panel or clearthe check box next to On on the Non-Genuine Mode page of the Printer Maintenance tab of the PrinterSetting Utility.This section includes:• "Using the Operator Panel" on page 224• "Using the Printer Setting Utility (Windows Only)" on page 225• Using the Operator PanelNOTE:• Before starting the operation described below, confirm that the LCD panel shows Ready to print.1 Press the (Menu) button.2 Select Admin Menu and then press the button.3 Select Maintenance and then press the button.4 Select Non-Genuine Mode and then press the button.5 Select Toner and then press the button.6 Select On and then press the button.7 Press the button until the top page is displayed.The printer switches to Non-Genuine Mode.224 Troubleshooting