DocuPrint P255 dw User Manual - Fuji Xerox Printers

• Auto ResetPurpose:To specify a time period before the printer restores the default setting for the current menu item andresumes the ready-to-print state when an attempt to change the setting is left unfinished.Values:45sec*1min2min3min4min* Factory default menu setting• Fault TimeoutPurpose:To specify a time period before the printer cancels a job that has halted abnormally. Any job will becancelled when it times out.Values:OffDisables the fault time-out feature.On 60sec* By default, the printer cancels a job in 60 seconds after the job3sec - 300sechalts abnormally. You can change the setting within a rangefrom 3 to 300 seconds.* Factory default menu setting• Job TimeoutPurpose:To specify a time period that the printer waits to receive data from a computer. Any print job will becancelled when it times out.Values:OffDisables the job time-out feature.On 30sec* By default, the printer waits to receive data from a computer5sec - 300secfor 30 seconds. You can change the setting within a rangefrom 5 to 300 seconds.* Factory default menu setting• mm / inchPurpose:To specify the measurement unit after the numeric value displayed on the operator panel.Values:Millimeters (mm)*Inches (")* Factory default menu settingUsing the Operator Panel Menus 169