DocuPrint P255 dw User Manual - Fuji Xerox Printers

• Mac OS X Wireless Settings on the Operator Panel(DocuPrint P255 dw only)You can configure wireless settings on the operator panel.IMPORTANT:• The Wireless LAN feature is not available in all locations. Please check with your local Fuji Xeroxrepresentative for availability of wireless in your location.• If you are using a method other than WPS to configure your wireless setting, be sure to get the SSID andsecurity information from a system administrator before starting the setup procedure.• Ensure that the Ethernet cable has been disconnected from the printer before you configure the wirelesssettings.NOTE:• Before you configure the wireless settings on the operator panel, you need to set up the wireless networksettings on your computer. For details, see the Setup Guide.• For information on the specifications of the wireless LAN feature, see the "Configuring Wireless NetworkSettings (DocuPrint P255 dw only)" on page 62.You can select a method to configure a wireless setting from the following:Manual Wi-Fi Setup for Access Point (Infrastructure) NetworkComputer-to-computer (Ad-hoc) NetworkAutomatic setup using WPS-PIN *1WPS-PBC *2*1 WPS-PIN is a method to authenticate and register devices required for wireless configuration, by entering PIN code inthe printer and computer. This setting, performed through access point, is available only when the access points of yourwireless router supports WPS.*2 WPS-PBC is a method to authenticate and register devices required for wireless configuration, by pressing the buttonprovided on the access point via wireless routers, and then performing WPS-PBC setting on the operator panel. Thissetting is available only when the access point supports WPS.To configure wireless settings, refer to the method you selected.• "Manual Wi-Fi Setup" on page 99• "Auto Setup With the Access Point" on page 10198 Printer Connection and Software Installation