21.07.2015 Views

DocuPrint P255 dw User Manual - Fuji Xerox Printers

DocuPrint P255 dw User Manual - Fuji Xerox Printers

DocuPrint P255 dw User Manual - Fuji Xerox Printers

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

• Configuring Wireless Network Settings (<strong>DocuPrint</strong><strong>P255</strong> <strong>dw</strong> only)You can configure wireless network settings with the Easy Install Navi.IMPORTANT:• Be sure to obtain the SSID and security information from a system administrator in advance when you use acommunications standard other than WPS to configure wireless network settings.• Ensure that the Ethernet cable has been disconnected from the printer before you configure the wirelessnetwork settings.The wireless network specifications are described below:ItemConnectivityConnectivity StandardBan<strong>dw</strong>idthData Transfer RateSecurityCertificationsWi-Fi Protected Setup (WPS)SpecificationWirelessIEEE 802.11b/g compliant2.4 GHzIEEE 802.11b mode: 11, 5.5, 2, 1 MbpsIEEE 802.11g mode: 54, 48, 36, 24, 18, 12, 9, 6 Mbps64 (40-bit key)/ 128 (104- bit key) WEP, WPA- PSK (TKIP, AES),WPA2-PSK (AES)(IEEE802.1x attestation function of WPA 1x noncorresponds)Wi-Fi, WPA2.0 (Personal)Push Button Configuration (PBC), Personal Identification Number(PIN)You can select a method to configure wireless network settings from the following:Wizard Setup Through USB ConnectionAdvanced Setup Through Ethernet connectionOperator PanelCentreWare Internet ServicesWPS-PIN *1WPS-PBC *2*1 WPS-PIN (Wi-Fi ® Protected Setup-Personal Identification Number) is a method to authenticate andregister devices required for wireless configuration, by entering PIN code in the printer and computer.This setting, performed through access point, is available only when the access points of your wirelessrouter supports WPS.*2 WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and registerdevices required for wireless configuration, by pressing the button provided on the access point viawireless routers, and then performing WPS-PBC setting on the operator panel. This setting is availableonly when the access point supports WPS.This section includes:• "Using Wizard Setup to Configure Wireless Network Settings" on page 63• "Using Advanced Setup to Configure Wireless Network Settings" on page 68• "Setting Up a New Wireless Network Environment for Your Computer (When You Need to Set UpYour Wireless Connectivity With Your Computer)" on page 7862 Printer Connection and Software Installation

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!