DocuPrint P255 dw User Manual - Fuji Xerox Printers

Overview of Network Setup and ConfigurationTo set up and configure the network:1 Connect the printer to the network using the recommended hardware and cables.2 Turn on the printer and the computer.3 Print the System Settings page and keep it for referencing network settings.4 Install the driver software on the computer from the Software Pack CD-ROM. For information ondriver installation, see the section in this chapter for the specific operating system you are using.5 Configure the printer’s TCP/IP address, which is required to identify the printer on the network.• Microsoft Windows operating systems: Run the installer on the Software Pack CD-ROM toautomatically set the printer’s Internet Protocol (IP) address if you connect the printer to anestablished TCP/IP network. You can also manually set the printer’s IP address on theoperator panel.• Mac OS X and Linux systems: Manually set the printer’s TCP/IP address on the operatorpanel. To use a wireless connection (DocuPrint P255 dw only), also configure wirelessnetwork settings on the operator panel.6 Print the System Settings page to verify the new settings.NOTE:• The reports and lists are all printed in English.• If the Software Pack CD-ROM is not available, you can download the latest driver from our web site:http://www.fujixeroxprinters.com/See also:• "Printing the System Settings Page" on page 15648 Printer Connection and Software Installation