Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
HARDWARE OPUS POLYMER ENCORE INSIDE ENCORE OUTSIDE<br />
Non-Mortise Hinge<br />
Used for regular single<br />
hinged panels, non-mortise<br />
hinges are powdercoated<br />
to match shutter paint<br />
colour, and stainless steel as<br />
standard for ENCORE<br />
Outside.<br />
76.2mm<br />
80mm<br />
80mm<br />
Rebate Hinge<br />
Used for bifold hinged<br />
panels with rabbet stiles,<br />
non-mortise hinges are<br />
powdercoated to match<br />
shutter paint colour.<br />
80mm<br />
Not available<br />
Not available<br />
Pivot Hinge<br />
Stainless steel pivot hinges<br />
are mounted on top and<br />
bottom of panels (stiles)<br />
and allow panel to fold<br />
back against the wall.<br />
Not available<br />
Hinges are not rebated.<br />
Hinges are not rebated.<br />
Hinge Packers<br />
Hinge packers can be<br />
installed behind non-mortise<br />
hinges to make minor<br />
adjustments to the position<br />
of the hinge.<br />
45mm<br />
Not available<br />
Not available<br />
Magnets & Striker Plates<br />
Bullet magnets are rebated<br />
into OPUS stiles and<br />
attached to a backplate<br />
for ENCORE. Round striker<br />
plates are standard or L<br />
shaped on request.<br />
Louvre Locks<br />
Louvre locks allow louvres to<br />
be secured in place at the<br />
fully closed and / or 40º<br />
position. More control in<br />
weather conditions or for<br />
the safety conscious.<br />
Not available<br />
24