O TTO M ARINE L IMITED - Microsoft Internet Explorer - SGX

“DP2” .......................... Dynamic position 2 — redundancy allows the vessel to maintain
position even with failure of one component or subsystem, required
for vessels which support manned diving operations
“drydock” or “graving dock” ......... Anarrow basin that can be flooded to allow a vessel to be floated
in and then drained to allow the vessel to come to rest on a dry
platform, as further described in the section “Our Business” of this
document
“drydocking”. .................... Theprocess by which a vessel manoeuvres into and comes to rest
in the drydock
“ducting” ....................... Asystem of ducts used in HVAC which enable air to be circulated,
delivered and removed, typically in an accommodation area
“dwt” or “deadweight tonnes” ........ Onedwtequals 1,000 kilograms and is a measure of the total load
which a ship can carry, including its cargo, provisions, fuel, stores,
bunker, crew and spares
“erection berth” ................... Thesite in the shipyard at which blocks are welded together to
form the vessel before launching
“GMDSS”. ...................... Global maritime and distress safety system
“GRT” ......................... Gross registered tonnage
“high-deck loading barge” ........... Abargewith a deck-loading capacity that is higher than five to
seven tonnes per square metre
“hoists” ......................... Lifting devices
“HVAC”........................ Heating, ventilation and air conditioning
“jetty” .......................... Anarea where vessels may be berthed afloat
“IEA” .......................... International Energy Agency
“Inspection Record” ............... Arecord of inspection of vessels under construction in hard copy
“ISO Quality Management System” .... Guidelines on quality management issued by the ISO
“ISO 14001 Safety Management
System” ........................ Guidelines on safety management issued by the ISO
“ISO 9000” ...................... Oneofaseries of documents that defines the requirements for the
ISO Quality Management System standard containing the actual
requirements with which an organisation must be in compliance to
become ISO 9001 registered and the current version of which is
the ISO 9001:2000
“ISO 9001” ...................... Oneofaseries of documents that defines the requirements for the
ISO Quality Management System standard containing the actual
requirements with which an organisation must be in compliance to
become ISO 9001 registered and the current version of which is
the ISO 9001:2000
“launching” ...................... Theoperation of transferring a vessel from dry land to the water
“mooring” ....................... Theprocess of securing a vessel to a berth
“newbuilding” .................... Aproject to construct a new vessel
“offshore support vessel” ............ Avessel that services offshore operations
“pax” .......................... Persons accommodated, being a measure of size of accommodation
barges
“plasma cutting machine” ........... Asteel cutting machine that uses a plasma torch
“plate blasting shop” ............... Atreatment shop where plate surfaces are blasted
212