Multicam 11.01 Operation Manual - EVS
Multicam 11.01 Operation Manual - EVS
Multicam 11.01 Operation Manual - EVS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Issue<br />
<strong>11.01</strong>.C<br />
1.2 Configuration on LSM Remote<br />
4<br />
<strong>Multicam</strong> - Version <strong>11.01</strong> – Operating <strong>Manual</strong><br />
<strong>EVS</strong> Broadcast Equipment SA – April 2012<br />
Before you start using the <strong>Multicam</strong> application in <strong>Multicam</strong> LSM mode, you need to<br />
ensure that the parameters are properly defined in the Setup menu of the Remote Panel,<br />
and in the Setup Configuration module of the <strong>Multicam</strong> application. The new<br />
parameters are saved as soon as they are modified.<br />
Important<br />
Prior to using <strong>Multicam</strong>, the operator should enter the Setup menu and set all<br />
necessary parameters. If clips are stored with certain parameters and the<br />
operator wishes to change them afterwards, those clips and playlists will not<br />
change. It is thus important to set these parameters first.<br />
The <strong>Multicam</strong> Configuration manual includes a detailed description of all settings which<br />
can be defined on the Remote Panel.
Change language