Multicam 11.01 Operation Manual - EVS

More documents

Recommendations

Info

Issue 11.01.C 4.3 Clip Numbering Hierarchy 22 Multicam - Version 11.01 – Operating Manual EVS Broadcast Equipment SA – April 2012 Multicam can store up to 900 (multiplied by the number of cameras) clips and 100 playlists in its libraries. 900 clips with up to 6 camera angles per clip result in 5400 clips on a server. This number is displayed in the upper right window of the VGA Setup screen (SHIFT+F2 from the PC keyboard). If you are working with XNet SDTI network, keep in mind that the total number of clips on the entire network is limited to 6,000 or 16,000, depending on the network settings. This number is displayed in the same area on the VGA Setup window. The following diagram represents the hierarchy of the Multicam clip numbering system. As an example, clip number “112” is used:
Multicam - Version 11.01 – Operating Manual EVS Broadcast Equipment SA – April 2012 5. Control Mode Multicam can be set in three different basic modes, depending on commands used. 5.1 Live (E2E) Mode Issue 11.01.C This mode selected at start-up can also be selected by pushing the RECORD key. Multicam records the input signal and plays it at the same time on the program output. 5.2 Search Mode This mode is selected by moving the jog dial. In this mode, the operator has the opportunity to search for an image, in order to define cue points or clips. Moving the command knob clockwise will force Multicam to search forward, moving the command knob counter-clockwise will force it to search backwards. The most important thing to note is that Multicam never stops recording while searching. 5.3 Playback Mode Moving the lever or pressing the PLAY key selects this last mode. Multicam plays the incoming signal delayed, a clip or a playlist, in slow motion and of course continues to record the incoming signal on disks. As soon as the lever is moved, Multicam starts playing back from the current picture. The playback speed is defined by the lever position. This is used to start the playback of a normal slow motion, as well as the playback of a clip or a playlist. During playback, the system never stops recording Each operation on the Remote Panel with the command KNOB or LEVER will be associated to the Search or Playback mode respectively. 23
Page 1: Operating Manual Version 11.01 - Ap
Page 4 and 5: Issue 11.01.C II Table of Contents
Page 6 and 7: Issue 11.01.C IV Multicam - Version
Page 8 and 9: Issue 11.01.C VI Multicam - Version
Page 11 and 12: Multicam - Version 11.01 - Operatin
Page 31: Multicam - Version 11.01 - Operatin
Page 83 and 84:
Multicam - Version 11.01 - Operatin
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
show all

Multicam 11.01 Operation Manual - EVS

Create successful ePaper yourself

Delete template?

Save as template?