Multicam 11.01 Operation Manual - EVS
Multicam 11.01 Operation Manual - EVS
Multicam 11.01 Operation Manual - EVS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Issue<br />
<strong>11.01</strong>.C<br />
6. PGM-PRV Mode<br />
26<br />
<strong>Multicam</strong> - Version <strong>11.01</strong> – Operating <strong>Manual</strong><br />
<strong>EVS</strong> Broadcast Equipment SA – April 2012<br />
6.1 1PGM+PRV (Press A from MAIN MENU)<br />
PGM1 CAM A *PRV1* CAM B<br />
Aud.Met. PgmSpd Sort->TC PostRoll<br />
Mix. Sw to IN Search Pref<br />
P.1 B.1 Clips: LOCAL Records: LOCAL<br />
PL 11: <<br />
Msg:<br />
Rst Cam Local Sync Prv 2nd CTRL<br />
Cam A Cam B Cam C Cam D<br />
At least 2 playback channels must be available to run this configuration.<br />
This mode allows the operator to make replays with/or without transition effects between<br />
all outputs. A string of replays can be put together and played back at the operator’s<br />
discretion.<br />
The LCD display is divided in two menus controlled by soft keys (A,B,C,D). To gain<br />
access to the upper menu, press MENU from the Remote Panel.<br />
6.1.1 Secondary Menu<br />
Aud. Met. PgmSpd Sort->TC PostRoll<br />
Mix. Sw to IN Search Pref<br />
Mix / Wipe L>R / Wipe R>L / Wipe U>D / Wipe D>U / Cut<br />
These options determine the transition effect that will occur between the PGM and PRV<br />
pictures. The mix, wipe and cut are on the same location. Pressing this button will browse<br />
through these effects, showing the active one on the LCD menu. Please refer to Setup<br />
menu to select the duration of the transition effect.
Change language