HP StorageWorks 4400 Enterprise Virtual Array user ... - BUSINESS IT

More documents

Recommendations

Info

Status Code Value 26 Parameter Object Does Not Exist 27 Target Object Does Not Exist 28 Timeout 29 Unknown Id 30 Unknown Parameter Handle 31 Unrecoverable Media Error 32 Invalid State 33 Transport Error 84 Error messages Meaning Case 15: GROUP discard: The Continuous Access group cannot be discarded as one or more virtual disk members exist. The operation cannot be performed because the object does not exist. This can indicate a user or program error. VOLUME set requested usage: The disk volume set requested usage cannot be performed because the disk group does not exist. This can indicate a user or program error. Case 1: The operation cannot be performed because the object does not exist. This can indicate a user or program error. Case 2: DERIVED UNIT discard: The operation cannot be performed because the virtual disk, snapshot, or snapclone does not exist or is still being created. Case 3: VOLUME set requested usage: The operation cannot be performed because the target disk volume does not exist. This can indicate a user or program error. Case 4: GROUP get name: The operation cannot be performed because the Continuous Access group does not exist. This can indicate a user or program error. A timeout has occurred in processing the request. The supplied storage cell identifier is invalid. This can indicate a user or program error. The supplied parameter handle is unknown. This can indicate a user or program error. The operation could not be completed because one or more of the disk media had an unrecoverable error. This error is no longer supported. A SCMI transport error has occurred. How to Correct Report the error to product support. Case 1: Report the error to product support. Case 2: Retry the request at a later time. Case 3: Report the error to product support. Case 4: Report the error to product support. Verify the hardware connections and that communication to the device is successful. Report the error to product support. Report the error to product support. Report the error to product support. Report the error to product support. Verify the hardware connections, communication to the device, and that the management software is operating successfully.
Status Code Value 34 Volume is Missing 35 Invalid Cursor 36 Invalid Target for the Operation 37 No More Events 38 Lock Busy 39 Time Not Set 40 Not a Supported Version 41 No Logical Disk for Vdisk 42 Logical disk Presented 43 Operation Denied On Slave 44 Not licensed for data replication 45 Not DR group member 46 Invalid DR mode 47 The target DR member is in full copy, operation rejected Meaning The operation could not be completed because the drive volume is in a missing state. The supplied cursor or sequence number is invalid. This may indicate a user or program error. The specified target logical disk already has an existing data sharing relationship. This can indicate a user or program error. There are no more events to retrieve. (This message is informational only.) The command lock is busy and being held by another process. The storage system time is not set. The storage system time is set automatically by the management software. The requested operation is not supported by this firmware version. This can indicate a user or program error. The specified SCVD does not have a logical disk associated with it. This can indicate a user or program error. The virtual disk specified is already presented to the client and the requested operation is not allowed. The request is not allowed on the slave controller. This can indicate a user or program error. This error is no longer supported. The operation cannot be performed because the virtual disk is not a member of a Continuous Access group. The operation cannot be performed because the Continuous Access group is not in the required mode. The operation cannot be performed because at least one of the virtual disk members is in a copying state. How to Correct Resolve the condition and retry the request. Report the error to product support. Report the error to product support. Report the error to product support. No action required. Retry the request at a later time. Report the error to product support. Report the error to product support. Report the error to product support. Delete the associated presentation(s) and retry the request. Report the error to product support. Report the error to product support. Configure the virtual disk to be a member of a Continuous Access group and retry the request. Configure the Continuous Access group correctly and retry the request. Wait for the copying state to complete and retry the request. HP StorageWorks 4400 Enterprise Virtual Array user guide 85
Page 1 and 2:
HP StorageWorks 4400 Enterprise Vir
Page 3 and 4:
Contents About this guide .........
Page 5 and 6:
HBA configuration .................
Page 7 and 8:
Figures 1 Storage system hardware c
Page 9:
Tables 1 Document conventions .....
Page 12 and 13:
Document conventions and symbols Ta
Page 14 and 15:
HP websites For additional informat
Page 16 and 17:
M6412 disk enclosures The M6412 dis
Page 18 and 19:
1. Double 7-segment display: enclos
Page 20 and 21:
Figure 7 Copper Fibre Channel cable
Page 22 and 23:
1. Battery 1 status LEDs 2. Fan 1 s
Page 24 and 25:
Figure 12 shows the back view of th
Page 26 and 27:
1. Power supply 2. AC input connect
Page 28 and 29:
to the loops in the main cabinet. C
Page 30 and 31:
PDU 1 PDU 2 PDMs voltages are then
Page 32 and 33:
1. PDM 1 2. PDM 2 3. PDM 3 4. PDU 1
Page 34 and 35: 1 4 2 1. Front door 2. Rear door 3
Page 36 and 37: 36 EVA4400 hardware
Page 38 and 39: Setting Path A - Failover Only Path
Page 40 and 41: When creating a virtual disk, one c
Page 42 and 43: Connecting to the management module
Page 44 and 45: Figure 24 WOCP Configure controller
Page 46 and 47: Example 2. Restoring configuration
Page 48 and 49: 48 EVA4400 operation
Page 50 and 51: When you have confirmed that a comp
Page 52 and 53: Description SPS-CABLE ASSY, 4Gb COP
Page 54 and 55: 54 Replacing array components
Page 56 and 57: On HP-UX, Solaris, Microsoft Window
Page 58 and 59: 2 5 8 6 10 Figure 27 Single path HB
Page 60 and 61: Windows Server 2003 (32-bit) and Wi
Page 62 and 63: Risks Limitations NOTE: Single path
Page 64 and 65: HBA configuration Risks Limitations
Page 66 and 67: 2 Figure 32 OpenVMS configuration 1
Page 68 and 69: HBA configuration Risks Limitations
Page 70 and 71: Risks Limitations Host 2 is a dual
Page 72 and 73: 2 Figure 36 IBM AIX Configuration 1
Page 74 and 75: Failure scenarios HP-UX Fault stimu
Page 76 and 77: NetWare Fault stimulus Server path
Page 78 and 79: VMware Fault stimulus Server path f
Page 80 and 81: Status Code Value 7 Invalid Class 8
Page 82 and 83: Status Code Value 25 Objects in you
Page 86 and 87: Status Code Value 48 Security crede
Page 88 and 89: Status Code Value 65 Bad image head
Page 90 and 91: Status Code Value 86 Command View E
Page 92 and 93: 92 Error messages
Page 94 and 95: Class A equipment This equipment ha
Page 96 and 97: Canadien notice (avis Canadien) Cla
Page 98 and 99: Finnish notice French notice German
Page 100 and 101: ka š s iek rtas tiks otrreiz ji p
Page 102 and 103: Normaler Betrieb (normal operation)
Page 104 and 105: 104 Regulatory notices
Page 106 and 107: EVA cabinet measures and tolerances
Page 108 and 109: Load (percent) 100 80 50 20 100 80
Page 110 and 111: asynchronous Events scheduled as th
Page 112 and 113: disk drive enclosure disk failure p
Page 114 and 115: FCA Fibre Channel Adapter. An adapt
Page 116 and 117: host-side ports See host ports. one
Page 118 and 119: mirrored caching A process in which
Page 120 and 121: ead ahead caching than from the dis
Page 122 and 123: UID Unit identification. uninitiali
Page 124 and 125: 124 Glossary
Page 126 and 127: Fibre Channel Disk Enclosure define
Page 128: 128
show all

HP StorageWorks 4400 Enterprise Virtual Array user ... - BUSINESS IT

Create successful ePaper yourself

Delete template?

Save as template?