F - Nice-service.com

2) How to use models BUPC and MOU [ B ] [ F ] [ C ] [ T ]Palm-top programming units BUPC and MOU are supplied with power by internal rechargeable batteries; to switchon the unit simply press the "POWER" key; at startup the unit will execute a brief TEST routine that performs diagnosticson the main internal components, after which it is ready for use. BUPC and MOU switch off automatically after1 minute during which no commands are executed; to switch off the units manually simply hold down the "POWER"key for at least 1 second. After powering on the unit and when the initial TEST routine is terminated the display presentsthe "FUNCTION MENU" from which it is possible to execute all the available functions including the selectionbetween the "Bio" or "FloR" modes on the BUPC programming unit and selection between the "Mom" and"Mot" modes on the MOU programming unit.GB2.1) Symbols [ B ] [ F ] [ C ] [ T ]A series of graphic symbols is displayed in the window at the bottom left corner of the screen identifying the operationsthat can be performed or the keys that can be used in the current stage of the procedureTable 3: Description of symbolsIndicates that the “ ” key can be pressed to select the next function or code.Indicates that the “Indicates that the “Indicates that the “” key can be pressed to select the previous function or code.” key can be pressed to move the cursor to the right when entering numbers.” key can be pressed to move the cursor to the left when entering numbers.TXCAIndicates that the “ Clear” key can be pressed to abandon the current function and return to theFUNCTION MENU.Indicates that the “ Enter” key can be pressed to activate the selected function or confirm the currentfunction.Only on BUPC; transmitter code optical reading is active; simply bring the transmitter up to the readerwith a key pressed.Only on MOU; transponder Card code reading is active; simply bring the card up to the reader19Indicates that keypad-based numerical data input is active; you can therefore type a number directly bymeans of the numerical keys 0, 1, 2, 3...9.The bottom right corner of the screen contains an additional 2 symbols; the first indicates the battery charge level: asolid rectangle denotes a fully charged battery; the rectangle gradually empties as the battery discharges until a completelyempty rectangle appears when the battery is completely drained. The second symbol describes the currentversion as shown in the table:Table 4: Operating modes for BUPC and MOUSymbol BUPC MOU Description of partsB Symbol identifying operation in "Bio" versionFSymbol identifying operation in "FloR" versionCTSymbol identifying operation in "Mom" versionSymbol identifying operation in "Mot" version2.2) Language selection [ B ] [ F ] [ C ] [ T ]Palm-top programming units BUPC and MOU are prearranged to function with different languages so that the operatorcan display messages in his preferred language. The language selection operation can be activated by pressingthe “ Enter” key during the test routine executed when the programming unit is switched on. When the initial testis concluded, press the “ Enter” key to activate the language selection function; here, you can select the preferredinterface language by means of the “ ” or “ ” keys, confirming the selection by pressing “ Enter”; the selectedlanguage will be permanently stored in the memory and from this time on all messages will be presented in this language.5