F - Nice-service.com

More documents

Recommendations

Info

3.1.8) 8 WRITE MEMORY [ B ]This function serves to write the codes present in the internal memory (Buffer) to the memory plugged into connector[7], thereby making a copy.The Buffer must be previously "loaded" with the codes to be copied by means of the READ MEMORY function performedon the source memory.3.1.9) 9 CANCEL BUFFER [ B ]Serves to delete the codes present in the internal memory, thereby freeing it for subsequent READ MEMORY functions.After launching the function the following message will be displayed: “Are you sure?” prompting for a secondconfirmation; this procedure is necessary because the operation is irreversible. If you effectively wish to clear thebuffer, press the “ Enter” key again at the prompt.3.1.10) 10 LOCK MEMORY [ B ]Applies a codes acquisition functions lock when the memory present in connector [7] is inserted in a receiver. In practice,a receiver with a "Locked" memory does not execute any form of code acquisition, restricting its operation exclusivelyto the codes that have been previously input without allowing any new codes to be entered (see also the specificinstructions in the receivers). Warning: The “Lock” is active when the memory is inserted in its receiver; the additionof codes directly from BUPC by means of the ADD CODES function is still possible3.1.11) 11 UNLOCK MEMORY [ B ]Removes the codes acquisition functions lock when the memory present in connector [7] is to be inserted in a receiver.This function is the exact opposite of the LOCK MEMORY function.3.1.12) 12 INSERT PASSWORD [ B ]This function serves to enter a password to access data in the memory plugged into connector [7]. The “Password”is a 6 digit number that serves to restrict access to the contents of the memory exclusively to authorised operators.Once it has been inserted, the password will be requested whenever data and codes contained in the memory cardare to be displayed or edited for the first time by means of the BUPC programming unit. The Password inhibits alsoall modifications to data contained in the memory card once it has been inserted in the receiver; in practice, a receiverwith a memory of this type will not be able to perform the acquisition procedure, to delete a code or to delete allthe codes.3.1.13) 13 REMOVE PASSWORD [ B ]This function serves to remove the password for access to data contained in the memory plugged into connector [7].This function is the opposite of the INSERT PASSWORD function.3.1.14) 14 CHANGE t TIMER [ B ]Serves to change the time interval of the timer when memory [7] is used in a receiver with the timer function active.After confirming the function the message "Time:" will be displayed followed by the current timer value; the time isdisplayed in the format “h” hours, “mm” minutes (tens and units) “ss” seconds (tens and units). The maximum timethat the receiver can administrate is 2 hours 22 minutes, 36 seconds.8
3.1.15) 15 CLONE TX CODE [ B ]Serves to change the original code of a transmitter connected to connector [2], copying it from another transmitterread by means of readers [10] or [11] thereby obtaining two perfectly identical codes (cloning). Warning: since the"Bio" system is based on the fact that each transmitter possesses a unique code, the possibility of having two or moreidentical transmitters reduces the security of the system; for this reason the CLONE TX CODE function is not activeon all BUPC units; in addition, the operation can only be performed once on each transmitter.Before activating the function extract exclusively the card from the transmitter on which you intend to change the codeand then insert the card into the specific adapter [12] and plug the adapter cable into socket [2].This done, you can activate the function. This will be followed by a series of tests performed by the barrier controllerto check whether or not it is able to support the increased power consumption required by the function, terminatingwith a test to confirm that the code has not already been changed. If all the checks produce positive results, the message“Code:” will be displayed and the code optical reader will be activated; now you must approach the reader withthe specimen transmitter with one key pressed and the code will be copied by means of the optical reader onto thetransmitter inserted in the adapter.GB43.2) BUPC functions in “FloR” mode [ ] FThis chapter contains an analysis of the functions of the BUPC programming unit in “FloR” modeTo execute several functions available in "FloR" mode the transmitter must be connected to the BUPC unit asdescribed in table 7 and as illustrated in figures 5.1 and 5.2.Table 7: Connection of transmitters to BUPCIn “FloR” transmitters the card must be removed fromthe plastic box and inserted into the specific adapter [12]after having connected it to socket [2].In “Very VR” transmitters the battery <strong>com</strong>partment mustbe opened and connector [13] inserted into the specificlocation after having connected it to socket [2].5.1 5.29
Page 1 and 2: programmation unitsMOU&BUPCOperatin
Page 3 and 4: 3.3.12 12 INSERT PASSWORD [ C ] 143
Page 5 and 6: 2) How to use models BUPC and MOU [
Page 7: 3.1.0) 0 FUNCTION MENU [ B ]This is
Page 11 and 12: 3.2.8) 8 WRITE MEMORY [ F ]This fun
Page 13 and 14: 3.2.24) 24 PUT ALTERA ON Bm [ F ]Ma
Page 15 and 16: 3.3.13) 13 REMOVE PASSWORD [ C ]Thi
Page 17 and 18: 3.4.7) 7 READ MEMORY [ T ]This func
Page 19 and 20: 5) Technical specifications [ B ] [
Page 21 and 22: 6.5) Installation [ B ] [ F ] [ C ]
Page 23 and 24: 7.2.6) Duplicate code onto TX [ B ]
Page 25 and 26: EC Declaration of ConformityIn Comp
Page 27 and 28: 3.3.12 12 METTI PASSWORD [ C ] 383.
Page 29 and 30: 2) Come usare BUPC e MOU [ B ] [ F
Page 31 and 32: 3.1.0) 0 MENU FUNZIONI [ B ]Questo
Page 33 and 34: 3.1.15) 15 CLONA TRASMETT. [ B ]Cam
Page 35 and 36: 3.2.8) 8 SCRIVI MEMORIA [ F ]Si scr
Page 37 and 38: 3.2.24) 24 PONI ALTERA A Bm [ F ]Pe
Page 39 and 40: 3.3.13) 13 TOGLI PASSWORD [ C ]Elim
Page 41 and 42: 3.4.7) 7 LEGGI MEMORIA [ T ]Si legg
Page 43 and 44: 5) Caratteristiche tecniche [ B ] [
Page 45 and 46: 6.5) Installazione r [ B ] [ F ] [
Page 47 and 48: 7.2.6) Duplica il codice su TX [ B
Page 49 and 50: Dichiarazione CE di conformità(Sec
Page 51 and 52: 3.3.12 12 ENTER MOT_PASSE [ C ] 623
Page 53 and 54: 2) Comment utiliser le BUPC et le M
Page 55 and 56: 3.1.0) 0 MENU FONCTIONS [ B ]C’es
Page 57 and 58: 3.1.15) 15 CLONE EMETTEURS [ B ]Cha
Page 59 and 60:
3.2.8) 8 ECRIRE MEMOIRE [ F ]Les co
Page 61 and 62:
3.2.24) 24 MET ALTERA A Bm [ F ]Per
Page 63 and 64:
3.3.13) 13 EFFACER MOT_PASSE [ C ]
Page 65 and 66:
3.4.7) 7 LIRE MEMOIRE [ T ]Tous les
Page 67 and 68:
5) Caractéristiques techniques [ B
Page 69 and 70:
6.5) Installation [ B ] [ F ] [ C ]
Page 71 and 72:
7.2.6) Copier le code sur TX [ B ]
Page 73 and 74:
Déclaration CE de conformité(selo
Page 75 and 76:
3.3.12 12 PASSWORD GEBEN [ C ] 863.
Page 77 and 78:
2) Gebrauch von BUPC und MOU [ B ]
Page 79 and 80:
3.1.0) 0 MENÜ FUNKTIONEN [ B ]Das
Page 81 and 82:
3.1.15) 15 TX KLONIER. [ B ]Ändert
Page 83 and 84:
3.2.8) 8 SPEICHER EINGABE [ F ]Die
Page 85 and 86:
3.2.24) 24 LGT ALTERA AN Bm [ F ]Er
Page 87 and 88:
3.3.13) 13 PASSWORD LÖSCHEN (REMOV
Page 89 and 90:
3.4.7) 7 SPEICHER LESEN (READ MEMOR
Page 91 and 92:
5) Technische Merkmale [ B ] [ F ]
Page 93 and 94:
6.5) Installation [ B ] [ F ] [ C ]
Page 95 and 96:
7.2.6) Code auf TX duplizieren [ B
Page 97 and 98:
CE-Konformitätserklärung(gemäß
Page 99 and 100:
3.3.12 12 INTR. PASSWORD [ C ] 1103
Page 101 and 102:
2) Cómo usar BUPC y MOU [ B ] [ F
Page 103 and 104:
3.1.0) 0 MENÚ FUNCIONES [ B ]Este
Page 105 and 106:
3.1.15) 15 CLONAR TRANS. [ B ]Cambi
Page 107 and 108:
3.2.8) 8 ESCRIBIR MEM. [ F ]Se escr
Page 109 and 110:
3.2.24) 24 PON. ALTERA A Bm [ F ]Pe
Page 111 and 112:
3.3.13) 13 QUITAR PASSWORD [ C ]Eli
Page 113 and 114:
3.4.7) 7 LEER MEMORIA [ T ]Se leen
Page 115 and 116:
5) Características técnicas [ B ]
Page 117 and 118:
6.5) Instalación [ B ] [ F ] [ C ]
Page 119 and 120:
7.2.6) Duplicar el código en TX [
Page 121 and 122:
Declaración de conformidad CE(Seg
Page 123 and 124:
3.3.12 12 WPISZ HASŁO [ C ] 1343.3
Page 125 and 126:
2) Jak używać BUPC i MOU [ B ] [
Page 127 and 128:
3.1.0) SPIS FUNKCJI (FUNCTION MENU)
Page 129 and 130:
3.1.15) 15 KLONUJ NADAJNIK. [ B ]Zm
Page 131 and 132:
3.2.8) 8 CZYTAJ Pamięć (WRITE MEM
Page 133 and 134:
3.2.24) 24 USTAW ALTERA na BM (PUT
Page 135 and 136:
3.3.13) 13 USUŃ HASŁO (REMOVE PAS
Page 137 and 138:
3.4.7) 7 CZYTAJ Pamięć (READ MEMO
Page 139 and 140:
5) Dane techniczne [ B ] [ F ] [ C
Page 141 and 142:
6.5) Instalowanie [ B ] [ F ] [ C ]
Page 143 and 144:
7.2.6) Kopiowanie kodu na TX (Dupli
Page 145:
Deklaracja zgodności CE(Według Dy
show all

F - Nice-service.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?