Views
1 week ago

Sony SLT-A33 - SLT-A33 Consignes d’utilisation Anglais

Sony SLT-A33 - SLT-A33 Consignes d’utilisation Anglais

Notes • This item

Notes • This item cannot be set when the exposure mode is set to Sweep Panorama. • For details on the number of images that can be taken when the image quality is changed, see page 32. About RAW images You need the “Image Data Converter SR” software included on the CD-ROM (supplied) in order to open a RAW image recorded on this camera. With this software, a RAW image can be opened and converted to a common format, such as JPEG or TIFF, and its white balance, color saturation, contrast, etc., can be readjusted. • The RAW format image cannot be printed using a DPOF (print) designated printer. • You cannot set [Auto HDR] on RAW format images. 144

Setting the method for recording on a memory card Selecting the method for assigning file numbers to images MENU button t setting 1 t [File Number] t Select the desired Series Reset The camera does not reset numbers and assigns numbers to files in sequence until the number reaches “9999.” The camera resets numbers in the following cases and assigns numbers to files from “0001.” When the recording folder contains a file, a number one higher than the largest number is assigned. – When the folder format is changed. – When all the images in the folder are deleted. – When the memory card is replaced. – When the memory card is formatted. Selecting the folder name format The recorded still images are stored in automatically-created folders in the DCIM folder of the memory card. MENU button t setting 1 t [Folder Name] t Select the desired Changing your setup Standard Form The folder name format is as follows: folder number + MSDCF. Example: 100MSDCF Date Form The folder name format is as follows: folder number + Y (the last digit)/MM/DD. Example: 10000405 (Folder name: 100, date: 2010/04/05) Note • The movie folder form is fixed as “folder number + ANV01.” 145