Views
8 months ago

Sony SLT-A33 - SLT-A33 Consignes d’utilisation Anglais

Sony SLT-A33 - SLT-A33 Consignes d’utilisation Anglais

– [Image: Quality] is

– [Image: Quality] is set to [Fine]. – [Autofocus Mode] is set to [Automatic AF]. – Shooting once every 30 seconds. – The power turns on and off once every ten times. – [GPS On/Off] is set to [On]. • About the number of images you can shoot when the flash is used: – The flash strobes once every two times. – The measurement method is based on the CIPA standard. (CIPA: Camera & Imaging Products Association) 34

Cleaning Cleaning the camera • Do not touch the inside of the camera, such as lens contacts, or the mirror. Since dust on the mirror or around the mirror may affect the images or the performance of the camera, blow the dust away using a commercially available blower*. For details on cleaning the image sensor, see the next page. * Do not use a spray blower. Using one may cause a malfunction. • Clean the camera surface with a soft cloth slightly moistened with water, then wipe the surface with a dry cloth. Do not use the following as they may damage the finish or the casing. – Chemical products such as thinner, benzine, alcohol, disposable cloths, insect repellent, sunscreen or insecticide, etc. – Do not touch the camera with the above on your hand. – Do not leave the camera in contact with rubber or vinyl for a long time. Preparing the camera Cleaning the lens • Do not use a cleaning solution containing organic solvents, such as thinner, or benzine. • When cleaning the lens surface, remove dust using a commercially available blower. In case of dust that sticks to the surface, wipe it off with a soft cloth or tissue paper slightly moistened with lens cleaning solution. Wipe in a spiral pattern from the center to the outside. Do not spray lens cleaning solution directly onto the lens surface. 35