Views
8 months ago

Sony SLT-A33 - SLT-A33 Consignes d’utilisation Anglais

Sony SLT-A33 - SLT-A33 Consignes d’utilisation Anglais

4 Press the shutter

4 Press the shutter button halfway down to adjust the focus. 5 Press and hold the shutter button for the duration of the shooting. As long as the shutter button is pressed, the shutter remains open. Shooting techniques • Use a tripod. • Set the focus to infinity in manual focus mode when shooting fireworks, etc. When the infinity position of the lens is not known, first adjust the focus on fireworks that is set off in the same general area, then shoot them. • Use the Wireless Remote Commander (sold separately) (page 120). Pressing the SHUTTER button on the Wireless Remote Commander triggers BULB shooting and pressing it again stops BULB shooting. You do not need to press and hold the SHUTTER button on the Wireless Remote Commander. • If you use a Remote Commander that is equipped with a shutter button lock function (sold separately), you can leave the shutter open using the Remote Commander. Notes • When using a tripod, turn off the SteadyShot function (page 57). • The longer the exposure time, the more conspicuous the noise on the image. • After shooting, noise reduction (Long Exposure NR) will be done for the same amount of time that the shutter was open. You cannot do any further shooting during the reduction. • When the Smile Shutter or Auto HDR function is activated, you cannot set the shutter speed to [BULB]. • If the Smile Shutter or Auto HDR function is used with the shutter speed set to [BULB], the shutter speed is temporarily set to 30 seconds. • It is recommended that you start BULB shooting after the temperature of the camera drops to prevent the quality of the image from deteriorating. 80

Recording movies 1 Press the MOVIE button to start recording. • Movie recording can be started from any exposure mode. • The shutter speed and aperture are adjusted automatically. • The camera continues to adjust the focus when it is in autofocus mode. MOVIE button 2 Press the MOVIE button again to stop recording. Shooting techniques • The following settings that were set during still image shooting are used without change. – White Balance – Creative Style – Exposure compensation – AF area – Metering mode • Exposure compensation can be used during movie recording. • Start recording after you adjust the focus. • When [AF area] is set to [Local], you can change the AF area during shooting. • If you want to adjust the blurring of the background, set the mode dial to “A” and set the camera to the manual focus mode. You can adjust the aperture using the control dial before shooting. Shooting images Notes • The angle of view of movies is narrower than that of still images. After you press the MOVIE button, the camera shows the actual range to be recorded (SLT-A33 only). • The Face Detection function cannot be used. • When [Display Rec. Data] is set to [For viewfinder], the LCD monitor is switched to the recording information display at the moment movie recording starts. 81