Sony SLT-A33 - SLT-A33 Consignes d’utilisation Anglais
Sony SLT-A33 - SLT-A33 Consignes d’utilisation Anglais
Sony SLT-A33 - SLT-A33 Consignes d’utilisation Anglais
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Check the lens attachment. If the<br />
lens is not supported, you can<br />
permit use of the lens in the<br />
custom menu.<br />
• The lens is not attached properly,<br />
or the lens is not attached.<br />
• When attaching the camera to an<br />
astronomical telescope or<br />
something similar, set [Release<br />
w/oLens] to [Enable].<br />
Contains no still images.<br />
Contains no movies.<br />
• There is no image in the memory<br />
card.<br />
Image protected.<br />
• You tried to delete protected<br />
images.<br />
Unable to print.<br />
• You tried to mark RAW images<br />
with a DPOF mark.<br />
Camera overheating. Allow it to<br />
cool.<br />
• The camera has become hot<br />
because you have been shooting<br />
continuously.<br />
Turn the power off. Cool the<br />
camera and wait until the camera<br />
is ready to shoot again.<br />
190<br />
• Because you have been<br />
recording for a long time, the<br />
temperature inside the camera<br />
has increased to an unacceptable<br />
level. Stop recording.<br />
Recording is unavailable in this<br />
movie format.<br />
• Set [Movie: File Format] to<br />
[MP4].<br />
• The number of images exceeds<br />
that for which date management<br />
in a database file by the camera<br />
is possible.<br />
• Unable to register to the database<br />
file. Import all the images to a<br />
computer using “PMB” and<br />
recover the memory card.<br />
Camera Error<br />
System Error<br />
• Turn the power off, remove the<br />
battery pack, then re-insert it. If<br />
the message appears frequently,<br />
consult your <strong>Sony</strong> dealer or local<br />
authorized <strong>Sony</strong> service facility.<br />
Image Database File error.<br />
Reboot.<br />
• There is something wrong<br />
occurred in the Image Database<br />
File. Execute [Recover Image<br />
DB] (page 147).