1 informazioni generali - Betamotor

1
2.5 Maximum speed (MAX)
This function describes the operation/
display of the maximum speed function.
The information is displayed using digits
2-5 and the abbreviation MAX, as shown
in fi g.9.
GENERAL INFORMATION
The parameter identifi es the vehicle’s
maximum speed reached, expressed in
Km/h or in mph, depending on the unit
of measurement selected.
The counter linked to this parameter can
be reset by pressing the button, near the
MAX function, for approx. 2 seconds,
until the value 00 appears.
MAX can be reset when the vehicle is
stopped or moving.
The value is reset when the unit of measurement
is changed.
The datum is not stored permanently.
Note: In the absence of mains
power, the MAX value is irretrievably
lost.
2.6 Standby
Fig. 9
In vehicles without a rev counter, the
standby function can be used to adjust
the clock (see parag. 2.8.1).
The information is displayed as in fi gure
10.
Fig. 10
GB
20