1 informazioni generali - Betamotor

1
3. ALARM MANAGEMENT
3.1. Battery voltage alarm
GENERAL INFORMATION
Every time the detected voltage value
falls below 10.0 V (±0.1 V), the system
activates the alarm procedure to signal
that the dashboard may lose its settings,
following the vehicle’s start-up.
The signalling causes the battery symbol
and the outline of the digital bar graph
to fl ash as shown in fi g. 15.
The alarm stops when the voltage rises
above 11.0 V (± 0.1 V).
4. WARNING LIGHTS AND BACK-
LIGHTING
4.1 Direction indicator lights
The system activates the indicator with
the activation of the direction indicators.
Note: The signal must already
be alternate when it reaches
the instrumentation.
4.2 Headlight indicator
The system activates the indicator in synchrony
with the activation of the mains
beams.
Fig. 15
GB
4.3 Neutral indicator light
The system activates the indicator in
synchrony when the gear lever is put in
the neutral position.
4.4 Side stand indicator light
The system activates the indicator when
the side stand is lowered.
24