Installation Manual - Future Pipe Industries

More documents

Recommendations

Info

10.4. Valves To avoid Wavistrong pipes being overstressed by bending, valves, butterfly valves or other heavy accessories must be supported separately. This can be done by direct support of the valve or indirectly by means of the flange bolts. Fig. 10.4.a. If a Wavistrong flange is connected to a steel flange, the support should preferably be situated at the side of the steel flange. This is also aplicable for underground applications. Pipe sections should not become overloaded by the weight of the accessories, for example by soil settlement. One suggestion would be concrete supports provided with steel connections, able to carry the full load of the valve. Also bending and torque forces caused by opening and closing of valves should be absorbed.Hand operated butterfly valves can be supported or mounted in a manhole as follows: Fig. 10.4.b. butterfly valve concrete wall butterfly valve support Wavistrong Installation Manual 50 steel support concrete foundation water baffle
Fig. 10.4.c. Fig. 10.4.d. concrete wall butterfly valve support butterfly valve concrete support Wavistrong Installation Manual 51 link-seal rubber inlay
Page 1 and 2: Wavistrong ® Installation Manual R
Page 3 and 4: Table of Contents 1. Introduction 5
Page 5 and 6: 1. Introduction This manual is writ
Page 7 and 8: 2.2. Unloading The unloading of mat
Page 9 and 10: G Unprotected flange-faces should n
Page 11 and 12: 4. Adhesive bonded joints Before ad
Page 13 and 14: The temperature of the heating blan
Page 15 and 16: 5. Integral Rubber seal joint (RSJ)
Page 17 and 18: Fig. 5.2.d. - Apply Future Pipe Ind
Page 19 and 20: 5.2.4. Rubber Seal Lock Joint (RSLJ
Page 21 and 22: 5.3. Dimensions of the rubber ring
Page 23 and 24: 5.4. Installation time for the rubb
Page 25 and 26: 6. Flanged joints Before assembling
Page 27 and 28: Fig. 6.2.e. The flange must be conn
Page 29 and 30: 6.5. Determination of the bolt leng
Page 31 and 32: 7.5. Laminating Grind the surface (
Page 33 and 34: 9. Installation of underground pipe
Page 35 and 36: If the trench wall is of a soil typ
Page 37 and 38: If Wavistrong pipes are installed i
Page 39 and 40: 9.3.1. Other methods of back fillin
Page 41 and 42: 9.5. Relief plates Where pipes are
Page 43 and 44: Using this method of installation r
Page 45 and 46: 10. Installation of above ground pi
Page 47 and 48: Fig. 10.2.b. Support distance When
Page 49: The choice of a certain clip design
Page 53 and 54: 10.6. Connection to other materials
Page 55 and 56: 10.8. UV resistance The topcoat of
Page 57 and 58: 10.10.3. After assembly of the R.T.
Page 59 and 60: 11. Field test procedure Before the
Page 61: 12. Safety precautions The followin

Installation Manual - Future Pipe Industries

Create successful ePaper yourself

Delete template?

Save as template?