standard specification for erection tender - GAIL

) Hydrostatic and pneumatic tests as per clause 4.2.3 of this specification
on representative samples.
c) Hardness verification as per clause 4.2.3 of this specification.
d) Disassembly and reassembly test on representative samples.
e) Review of all certificates and test reports as indicated in clause 4.2 of
this specification.
4.3.2 In the event when no witness inspection is carried out by purchaser, vendor
shall anyway complete the tests and test reports for the same shall be submitted
to purchaser for scrutiny.
5.0 SHIPPING
5.1 All threads/ends shall be protected with plastic caps to prevent damage/entry of
foreign matter.
5.2 All the fittings in oxygen and chlorine service shall be separately packed along
with a certificate indicating 'SUITABLE FOR OXYGEN/CHLORINE SERVICE', as
applicable.
6.0 REJECTION
6.1 Vendor shall prepare their offer strictly as per clause 1.2 of this specification
and shall attach only those documents, which are specifically indicated in the
material requisition.
6.2 Any offer not conforming to the above requirements, shall be summarily
rejected.
GAIL (INDIA) LTD
NEW DELHI
STANDARD SPECIFICATION FOR
INSTRUMENT TUBE FITTINGS
SPECIFICATION REV-0
S-08-02-014
Page 7 of
8
Copyright GAIL – All rights reserved