Fiber Optic Design Guide - Maite y Mario
Fiber Optic Design Guide - Maite y Mario
Fiber Optic Design Guide - Maite y Mario
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Fiber</strong> <strong>Optic</strong>s<br />
E6-1<br />
Rack Mount<br />
<strong>Fiber</strong> <strong>Optic</strong> VSB/AM Transmitters - 10 Channels - MIBT/SIBT S3A-210<br />
RETRO-LINX<br />
Stand Alone<br />
ORDERING INFORMATION:<br />
MIBT-S3A-210<br />
Stock No. 7423<br />
SIBT-S3A-210<br />
Stock No. 7423-S<br />
FEATURES<br />
Up to Ten Channels on One Single<br />
Mode <strong>Fiber</strong><br />
Low Cost<br />
Wide Bandwidth: 5-250 MHz<br />
Supports Transmission of Sub-band<br />
Low-band, FM, Mid-band, and<br />
High-band Channels<br />
Utilizes Inputs from Standard CATV<br />
VSB/AM Modulators, Processors, etc.<br />
Built-In RF Input Level Indicator in<br />
Transmitter for Easy Setup<br />
Compatible with Standard Television<br />
Industry Voltage and Impedance<br />
Levels<br />
Carrier-to-Noise Ratio (CNR) to 51 dB<br />
1310 nm Operation to 10 km<br />
Compact Size, Rugged Package<br />
The MIBT fits in our MIRC 19”<br />
Headend Chassis<br />
The SIBT is <strong>Design</strong>ed for Stand<br />
Alone Applications<br />
CNR Improves With Lower Channel<br />
Loading<br />
Unit Includes a Tri-color LED That<br />
Indicates Optimum RF Input Level<br />
When Green<br />
10<br />
Channels<br />
“Move Your Video Channels From Sub Return Coaxial Plant To <strong>Fiber</strong>! Free Up Valuable Spectrum & Improve Picture Quality!”<br />
The MIBT/SIBT-S3A-210 series fiber optic transmitters provide a<br />
high-quality system for transferring up to ten video channels over single<br />
mode optical fiber with complete EMI immunity. The units offer<br />
exceptional analog bandwidth from 5 MHz to 250 MHz allowing transmission<br />
of all sub-band channels, low-band channels, FM channels,<br />
and mid-band channels. The lowest high-band channels may also be<br />
accommodated. The best performance will be achieved when the<br />
channel plan is designed to contain all of the channels within a single<br />
octave of bandwidth. The system can transmit signals from a VCR,<br />
camcorder or cable television feed over a distance of 10 km on one single<br />
mode fiber.<br />
It is very important to provide the proper RF signal level to the transmitter.<br />
The transmitter includes a tri-color RF level indicator that allows<br />
the optimum RF input level to be quickly and positively identified. A<br />
state-of-the-art 1310 nm single mode laser and PIN detector are used to achieve the performance levels cited. This<br />
product is recommended for use with single mode fibers only. A minimum fiber bandwidth of 500 MHz is required.<br />
APPLICATIONS<br />
CATV Distribution in a LAN Environment (<strong>Fiber</strong>-to-the-Desk, <strong>Fiber</strong> to UTP, or <strong>Fiber</strong> to Coax)<br />
Campus Media Retrieval Corporate TV Video Distribution<br />
Motel/Hotel Pay Channel Distribution Teleconferencing<br />
Security & Surveillance Courts/Penal Systems<br />
Tunnel Monitoring Radar Remoting<br />
Satellite Back-Haul IF (70 MHz)<br />
SPECIFICATIONS<br />
LINK @ 25 ˚C, single mode fiber<br />
MIBT-S3A-210/SIBT-S3A-210 Typical Units<br />
Bandwidth: 5-250 MHz<br />
Operating Wavelength: 1310 nm<br />
CATV Channels: 10<br />
RF Input Level (10 Channel): +7.0 dBmV<br />
Power Supply Voltage: 12 VDC<br />
Power Dissipation: 3.6 W<br />
<strong>Optic</strong>al Output Power: +3 dBm<br />
Input/Output Impedance: 75 Ω<br />
CNR (+1 dBm Input, 10 Ch. Load): 51 dB<br />
CSO (10 Ch. Load): -72 dB<br />
CTB (10 Ch. Load): -64 dB<br />
Operating Temperature Range: +10 to +40 ˚C<br />
Weight: 10 oz<br />
283.5 g<br />
Physical Dimensions<br />
SIBT: 5.75 x 2.95 x 1.12 (146 x 74 x 28 mm) in<br />
MIBT: 2.9 x 3.5 x 7.5 (74 x 89 x 191 mm) in<br />
Connectors<br />
<strong>Optic</strong>al Output: FC/APC<br />
RF Input: “F”<br />
Power Supply<br />
SIBT: ACCS-PS-170 (BT Stock No. 7419)<br />
MIBT: MIPS-12A (BT Stock No. 7722A)