Fiber Optic Design Guide - Maite y Mario
Fiber Optic Design Guide - Maite y Mario
Fiber Optic Design Guide - Maite y Mario
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Fiber</strong> <strong>Optic</strong> VSB/AM Receivers - 15 Channels - MIBR/SIBR S4A-415<br />
“Move Your Video Channels From Sub Return Coaxial Plant To <strong>Fiber</strong>! Free Up Valuable Spectrum & Improve Picture Quality!” RETRO-LINX<br />
The MIBR/SIBR-S4A-415 series fiber optic receivers provide a<br />
high-quality system for transferring up to fifteen video channels over<br />
single mode optical fiber with complete EMI immunity. The units offer<br />
exceptional analog bandwidth from 5 MHz to 350 MHz allowing transmission<br />
of all sub-band channels, low-band channels may also be<br />
accommodated. The best performance will be achieved when the<br />
channel plan is designed to contain all of the channels within a single<br />
octave of bandwidth. The system can transport TV channels, along<br />
with their sound carriers, over a distance of 20 km at 1310 nm, on one<br />
single mode fiber. A possible channel plan for the fifteen channel link<br />
is TV channels A through I and 7 through 12. The carrier to noise ratio<br />
(CNR) is typically 52 dB at low optical loss. The performance increases<br />
as the channel loading decreases.<br />
Stand Alone<br />
It is very important to provide the proper RF signal level to the<br />
receiver. The receiver includes a built in, tri-color LED. This optical level indicator allows the optimum optical input level<br />
to be quickly and positively identified. If the LED is yellow, the input level is too low. If it is green, the input level falls<br />
within the optimum range. When the optical input level is too high, the LED will be red. This product is recommended<br />
for use with single mode fibers only, and a minimum fiber bandwidth of 500 MHz is required.<br />
APPLICATIONS<br />
CATV Distribution in a LAN Environment (<strong>Fiber</strong>-to-the-Desk, <strong>Fiber</strong> to UTP, or <strong>Fiber</strong> to Coax)<br />
Campus Media Retrieval Corporate TV Video Distribution<br />
Motel/Hotel Pay Channel Distribution Teleconferencing<br />
Security & Surveillance Courts/Penal Systems<br />
Tunnel Monitoring Radar Remoting<br />
Satellite Back-Haul IF (70 MHz)<br />
SPECIFICATIONS<br />
LINK @ 25 ˚C, single mode fiber<br />
MIBR-S4A-415/SIBR-S4A-415 Typical Units<br />
Bandwidth: 5-350 MHz<br />
Operating Wavelength: 1310/1550 nm<br />
CATV Channels: 15<br />
Power Supply Voltage: 12 VDC<br />
Power Dissipation: 3.6 W<br />
<strong>Optic</strong>al Input Range: -9 to +5 dBm<br />
Input/Output Impedance: 75 Ω<br />
CNR (+1 dBm Input, 15 Ch. Load): 52 dB<br />
CSO (15 Ch. Load): -67 dB<br />
CTB (15 Ch. Load): -66 dB<br />
Operating Temperature Range: +10 to +40 ˚C<br />
Weight: 6 oz<br />
170 g<br />
Physical Dimensions<br />
SIBR: 5.75 x 2.95 x 1.12 (146 x 74 x 28 mm) in<br />
MIBR: 2.9 x 3.5 x 7.5 (74 x 89 x 191 mm) in<br />
Connectors<br />
<strong>Optic</strong>al Input: FC/APC<br />
RF Input: “F”<br />
Power Supply<br />
SIBR: ACCS-PS-170 (BT Stock No. 7419)<br />
MIBR: MIPS-12A (BT Stock No. 7722A)<br />
Rack Mount<br />
E9-1<br />
ORDERING INFORMATION:<br />
MIBR-S4A-415<br />
Stock No. 7425<br />
SIBR-S4A-415<br />
Stock No. 7425-S<br />
FEATURES<br />
Up to Fifteen Channels on<br />
One Single Mode <strong>Fiber</strong><br />
Low Cost<br />
Wide Bandwidth: 5-350 MHz<br />
Supports Transmission of Sub-band<br />
Low-band, FM, Mid-band, and<br />
High-band Channels<br />
Utilizes Inputs from Standard CATV<br />
VSB/AM Modulators, Processors, etc.<br />
Built-In RF Input Level Indicator in<br />
Transmitter for Easy Setup<br />
Compatible with Standard Television<br />
Industry Voltage and Impedance<br />
Levels<br />
Carrier-to-Noise Ratio (CNR) to 52 dB<br />
1310 nm Operation to 20 km<br />
Compact Size, Rugged Package<br />
The MIBR fits in our MIRC 19”<br />
Headend Chassis<br />
The SIBR is <strong>Design</strong>ed for Stand<br />
Alone Applications<br />
CNR Improves With Lower Channel<br />
Loading<br />
Tri-color LED That Indicates Optimum<br />
<strong>Optic</strong>al Input Level<br />
15<br />
Channels<br />
<strong>Fiber</strong> <strong>Optic</strong>s