9363692, Operating manual HDTV Satellite receiver UFS ... - Kathrein

After calling up the menu you will see
the following display:
The receiver searches for available
updates.
The following display then appears
(example):
Update Software
Mainmenu - Service Menu
If new software is available (but only then), use the buttons (No/Yes) to select whether you
wish to load the new software that is available. If you are unsure whether you wish to load the new
software, you can initially set the reply to “No”. If you do agree to the changes, you can then proceed
to download the software.
Channel List
The search for available
updates may take a few
minutes.
If a new channel list is available (but only then), use the buttons (Do not load/overwrite)
to select whether you wish to load the new channel list that is available and overwrite the old channel list.
Pre-sorted for (appears only if “Overwrite channel list” was selected)
Use the buttons to select the country for which you would like the new list to be pre-sorted.
When you have made your settings, use the buttons to select “Start Update” and press the
button to start updating.
111