9363692, Operating manual HDTV Satellite receiver UFS ... - Kathrein

You can use the buttons to
activate the sleep timer.
Sleep Timer
You can use the “Sleep Timer” function
to set an inactive time period after which
the receiver will automatically switch
into “Stand-by” mode.
118
Mainmenu - Service Menu
To do this, use the buttons to select “Yes”. Exit the menu using the button. Now press
the button. The receiver now displays a window, in which you can use the buttons
to select the desired inactive time period for the receiver. After this the receiver will run quite normally,
then at the expiry of the inactive time period that was input, automatically switch into “Stand-by” mode.
If you do not start inputting the inactive time period within fi ve seconds of the window appearing,
the receiver will automatically revert to “Stand-by” mode.
After calling up the menu you will see
the following display:
Use the buttons to select the desired menu language and confi rm your selection using the
button.
The following languages are available for selection: German, English, French, Italian, Spanish,
Czech, Polish and Turkish.
Press the button to return to the mainmenu.
Mainmenu - Language settings