9363692, Operating manual HDTV Satellite receiver UFS ... - Kathrein

Programme not in EPG:
Select any programme on the channel
on which the desired programme is to
be broadcast at a later date, and press
the (red dot) button. The following
display appears (example):
EPG (Electronic Programme Guide)
Then press the buttons to access the “Recording” line.
Use the buttons to select the desired recording mode. The following recording mode options
are available:
once The recording will be performed once
daily The recording will be performed daily at the time you specify
weekly The recording will be performed once a week on the same day and at the same
time
user-defi ned The recording will be performed on days specifi ed by you at times specifi ed by you
Series recording The selected programme will be set up by the EPG for recording every time it is
broadcast (only on the selected channel). This function however requires that
the EPG data is updated daily
Use the cursor buttons () to select the further items and use the number keys to make the settings.
When all settings have been made, press the button to save the recording settings. You can view
the scheduled recordings in the timer list view of the EPG (see “Timer list” section).
First you must use the buttons in the “Target” line to select the connected USB storage
medium. If the USB storage medium has more than one partition, you can select the chosen one here.
Each partition is displayed an a separate USB storage medium.
Then press the buttons to access the “Recording” line. Use the buttons to select
the desired recording mode. The following recording mode options are available: see table above
(except series recording).
As there is no EPG data, you must enter the data (date, start, end) manually.
Enter the data using the cursor buttons () or the number keys. When all settings have been
made, press the button to save the recording settings. You can view the scheduled recordings in
the recording schedule view of the EPG (see item “Recording schedule”).
71