Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
15. Lift up carefully to remove the CPU.<br />
NOTE: When installing the CPU, make sure to install the CPU with PIN 1 at the corner as shown.<br />
Removing the Modem Board<br />
1. See “Removing the Battery Pack” on page 60.<br />
2. See “Removing the SD dummy card” on page 60.<br />
3. See “Removing the ExpressCard dummy card” on page 61.<br />
4. See “Removing the Lower Cover” on page 61.<br />
5. See “Removing the DIMM” on page 62.<br />
6. See “Removing the WLAN Board Modules” on page 63.<br />
7. See “Removing the Hard Disk Drive Module” on page 64.<br />
8. See “Removing the Keyboard” on page 67.<br />
9. See “Removing the M<strong>id</strong>dle Cover” on page 68.<br />
10. See “Removing the LCD Module” on page 70.<br />
11. See “Separating the Upper Case from the Lower Case” on page 74.<br />
12. See “Removing the Main Board” on page 85.<br />
90 Chapter 3