You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Removing the CPU and VGA Heatsink Module<br />
1. See “Removing the Battery Pack” on page 60.<br />
2. See “Removing the SD dummy card” on page 60.<br />
3. See “Removing the ExpressCard dummy card” on page 61.<br />
4. See “Removing the Lower Cover” on page 61.<br />
5. See “Removing the DIMM” on page 62.<br />
6. See “Removing the WLAN Board Modules” on page 63.<br />
7. See “Removing the Hard Disk Drive Module” on page 64.<br />
8. See “Removing the Keyboard” on page 67.<br />
9. See “Removing the M<strong>id</strong>dle Cover” on page 68.<br />
10. See “Removing the LCD Module” on page 70.<br />
11. See “Separating the Upper Case from the Lower Case” on page 74.<br />
12. See “Removing the Main Board” on page 85.<br />
13. Disconnect the heatsink fan connector from the main board.<br />
14. Remove the four screws (E) securing the CPU and VGA heatsink module in place.<br />
Step Size (Quantity) Color Torque<br />
1~4 M2 x L4 (4) Silver 1.6 kgf-cm<br />
88 Chapter 3