Ponton X/P 2.3 ? Installation and Configuration Guide

Configuration Options
Once again, please note that you will only be able to select options that have been
activated for both of the partners in question. So if you and your communication
partner have not specified a common set of options, there will be no options to agree
upon and the page will have no content. In this case the settings in the partner
configurations will need to be modified so that an agreement configuration is possible.
Please note, however, that the agreement has to be compatible on both sides, so you
will want to contact the partner in question to specify the options to be supported.
Note: If you subsequently change your partner configurations so that certain settings
in the partner agreement are no longer applicable, you will see a red X at the top of
the agreement configuration screens and the relevant settings will be highlighted red.
Please deactivate any settings in the agreement that are not supported by both
partners. You can quickly check which settings are affected by going to the Messenger
Status screen. The Events list at the bottom of the screen will contain an entry for each
of the “conflicting settings”. To call up the relevant configuration screen you can simply
click on the error description.
Note: If you imported a partner configuration from the profile registry, you will not be
able to change your partner’s configuration settings locally. You will have to contact
the relevant partner, agree on a common set of configuration options, and then
upload/update each other’s modified configurations via the profile registry.
Ponton X/P 2.3 – Installation and Configuration Guide 54