Manual TCIP 603-03 TCIP SRV 603-0 - Siedle
Manual TCIP 603-03 TCIP SRV 603-0 - Siedle
Manual TCIP 603-03 TCIP SRV 603-0 - Siedle
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Manual</strong> <strong>TCIP</strong> <strong>6<strong>03</strong></strong>-<strong>03</strong><br />
3.3.1.2. Creating inputs<br />
Creating new inputs is only possible in conjunction with the FSM 740-... . If no FSM 740-... is found on the Vario bus<br />
when initializing the <strong>TCIP</strong> <strong>6<strong>03</strong></strong>-... , this functionality is disabled. A name and an input of the FSM 740-... is assigned to<br />
each input.<br />
Fig. 5: Creating an input<br />
Field name Description<br />
Name Describes the name of the input.<br />
Input of the FSM Indicates the input at the FSM 740-... A maximum of 3 additional inputs can be created.<br />
Table 3: Creating an input: Description of the fields in the dialogue box<br />
This dialogue box contains one action.<br />
Action Description<br />
Create This action creates the input.<br />
Table 4: Creating an input: Action in the dialogue box<br />
3.3.1.3. Changing/removing an input<br />
If local inputs are changed, the section Change input does not appear.<br />
Fig. 6: Changing/removing an input<br />
Field name Description<br />
Name Describes the name of the input.<br />
Input of the FSM Indicates the input at the FSM 740-...<br />
Table 5: Changing/removing an input: Description of the fields in the dialogue box<br />
The page contains two actions.<br />
Action Description<br />
Change/remove Depending on the selection in the previous menu, Change or Remove is indicated.<br />
Table 6: Changing/removing an input: Actions in the dialogue box<br />
11