Manual TCIP 603-03 TCIP SRV 603-0 - Siedle
Manual TCIP 603-03 TCIP SRV 603-0 - Siedle
Manual TCIP 603-03 TCIP SRV 603-0 - Siedle
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Manual</strong> <strong>TCIP</strong> <strong>6<strong>03</strong></strong>-<strong>03</strong><br />
3.3.1.5. Creating an output<br />
Creating new outputs is only possible in conjunction with the FSM 740-... . If no FSM 740-... is found when initializing<br />
the <strong>TCIP</strong> <strong>6<strong>03</strong></strong>-..., this functionality is disabled. By linking an SCE 640-..., a further 8 outputs are provided. When using the<br />
SCE 640-... at the FSM 640-... the function in the FSM 740-... must be activated.<br />
Fig. 8: Creating an output<br />
Field name Description<br />
Name Describes the name of the output.<br />
FSM outputs Defines one of the outputs of the FSM 740-... / SCE 640-...<br />
Table 8: Adding an output: Description of the fields in the dialogue box<br />
This page contains the action.<br />
Action Description<br />
Create This action creates the output.<br />
Table 9: Adding an output: Actions in the dialogue box<br />
3.3.1.6. Changing/removing an output<br />
If local outputs are changed, the section FSM does not appear.<br />
Fig. 9: Changing/removing an output<br />
Field name Description<br />
Name Describes the name of the output.<br />
FSM outputs Defines one of the outputs of the FSM 740-... / SCE 640-...<br />
Table 10: Changing/removing an output: Description of the fields in the dialogue box<br />
The page contains two actions.<br />
Action Description<br />
Saving/removing This action saves or removes the output.<br />
Table 11: Changing/removing an output: Actions in the dialogue box<br />
13