Manual TCIP 603-03 TCIP SRV 603-0 - Siedle
Manual TCIP 603-03 TCIP SRV 603-0 - Siedle
Manual TCIP 603-03 TCIP SRV 603-0 - Siedle
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Manual</strong> <strong>TCIP</strong> <strong>6<strong>03</strong></strong>-<strong>03</strong><br />
6.7. Task list<br />
Faulty tasks block all subsequent tasks. Faulty tasks (red symbol) are regularly restarted. Tasks marked yellow are currently<br />
being processed or have not yet been started if they are shown with a red cross. Tasks marked yellow with blue edge are<br />
selected for deletion. Tasks marked blue have been deleted.<br />
For all entries and changes, check the „Task list“ under „Reports“ in order to recognize error messages in good time.<br />
Tasks marked yellow are in progress, tasks marked green have been successfully processed, tasks marked red are faulty,<br />
tasks marked blue have been deleted. Tasks marked yellow and red can be deleted by clicking on the red cross. Tasks<br />
marked in red have been aborted due to a fault and are restarted at regular intervals. In some cases, the following tasks<br />
cannot be processed until all the previous tasks have been successfully completed or deleted by the operator.<br />
Fig. 69: Task list<br />
If tasks are deleted by the server‘s administrator, then the administrator must ensure that the resulting inconsistencies between<br />
the server data and the data of the <strong>TCIP</strong> terminals are manually corrected.<br />
Fig. 70: <strong>TCIP</strong> management<br />
This should preferably be done using the command „Write <strong>TCIP</strong>“ in the <strong>TCIP</strong> menu. The command „Read <strong>TCIP</strong>“ or<br />
manual correction of the entries in the server are also possible with restrictions.<br />
56