Manual TCIP 603-03 TCIP SRV 603-0 - Siedle
Manual TCIP 603-03 TCIP SRV 603-0 - Siedle
Manual TCIP 603-03 TCIP SRV 603-0 - Siedle
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Manual</strong> <strong>TCIP</strong> <strong>6<strong>03</strong></strong>-<strong>03</strong><br />
6.2. IP address settings<br />
Selection of the file: /etc/network/interfaces<br />
This file contains all configurations of the network cards. (Lines preceded by # are only comments and are not taken into<br />
consideration.)<br />
Fig. 65: IP address settings<br />
Once the changes have been made, the server has to be rebooted for the network settings to take effect.<br />
6.3. Dynamic IP address (DHCP)<br />
This setting is pre-set following installation.<br />
Remove all entries under „auto eth0“.<br />
Now enter the following lines:<br />
iface eth0 inet dhcp<br />
The file should now look like this:<br />
Fig. 66: IP address settings DHCP<br />
Now save and close the file, and reboot the server.<br />
54
Change language