Manual TCIP 603-03 TCIP SRV 603-0 - Siedle
Manual TCIP 603-03 TCIP SRV 603-0 - Siedle
Manual TCIP 603-03 TCIP SRV 603-0 - Siedle
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Manual</strong> <strong>TCIP</strong> <strong>6<strong>03</strong></strong>-<strong>03</strong><br />
6.4. Static IP address<br />
Remove all entries under „auto eth0“.<br />
Now enter the following lines (these are sample addresses):<br />
iface eth0 inet static<br />
address 192.168.7.25<br />
netmask 255.255.255.0<br />
#gateway 0.0.0.0<br />
If you require a gateway entry, remove the lozenge in front of „gateway“ and instead of the „0.0.0.0“ enter a correct IP<br />
address.<br />
Now save and close the file, and reboot the server.<br />
6.5. DNS server<br />
When using a static IP address, to ensure correct matching of the NTP server, the DNS server address must be entered.<br />
This address is saved in the file /etc/resolv.conf.<br />
Fig. 67: DNS server<br />
6.6. NTP server<br />
Time matching of the <strong>TCIP</strong> <strong>SRV</strong> takes place using an integrated NTP service. In the as-delivered status, matching takes<br />
place automatically over the internet. If required, the enquiry can be adjusted in the file /etc/ntp.conf.<br />
Selection of the file: /etc/ntp.conf<br />
Fig. 68: Time server settings<br />
55
Change language