Manual TCIP 603-03 TCIP SRV 603-0 - Siedle

Manual TCIP 603-03
8. Commissioning
8.1. Recommended commissioning sequence
When commissioning the server solution, it is advisable to carry out the following points in sequence:
1. Carry out all backup settings and all settings in the operating system which deviate from the standard.
2. Server - Enter TCIP addresses
3. TCIP - Carry out network settings
4. Recommendation: 1. Generate a backup to allow you to restore the „as-delivered status“ at a later date
5. TCIP - Define inputs
6. TCIP - Define outputs
7. TCIP - Read in readers, define names if available Define the server master FPM
8. TCIP - Set system time / clock change
9. TCIP - Create doors (leaving users, access groups, time profiles and public holidays free)
10 Entering the TCIP – IP address into the individual TCIPs
11. Server - Read readers
12. Server - Read doors
13. Recommendation: Generate backup
14. Server - Create time profiles
15. Server - Create public holidays/vacation
16. Server - Create access groups
17. TCIP - Doors: where applicable assign time profiles
18. Server – If doors are changed in TCIP 603-…, then read doors
19. Server – Tools/general settings: Set delete cycle for the log file
20. Server – Tools/general settings: If available, select server-master-FPM
21. Server – Tools/general settings: Carry out backup settings
22. Server – Create users
23. Recommendation: Generate backup
24. Move the previously set backup files from the server to a PC from which the settings are performed
59