Manual TCIP 603-03 TCIP SRV 603-0 - Siedle

Manual TCIP 603-03
4.3. Reading reports
4.3.1. Absentee list
The absentee list shows all users who are not currently logged into the „secured“ area.
Fig. 56: Reading reports – Absentee list
In the absentee list, the names and personnel number of the user is displayed.
4.3.2. Attendance list
The attendance list indicates all users who have logged into the „secured“ area.
Fig. 57: Reading reports – Attendance list
For each line, the doors, the users, the personnel numbers and the time of entry are described. In addition, a user can be
set to absent using the action „Remove“.
4.3.3. Event log
In this log, all system events, users and doors are entered. This example illustrates what a login and logout process looks
like.
The login process:
Fig. 58: Reading reports – Event protocol (login process)
The door „side entrance“ has two input readers with a logical „AND“ link. The entry at 11:06:16 is the ELM (side entrance
I2). In the line with the time stamp 11:06:26 the key combination was actuated (side entrance I1). In addition, this
line also contains the information that this user has logged on. The lines with the time stamp 11:06:34 and 11:06:35
appear only when a door sensor is connected. The first shows that the door has been opened and the second that the
door has been closed again.
The logout process:
Fig. 59: Reading reports – Event protocol (logout process)
The input at 11:13:03 indicates that a user has logged out. The other two signal – if a door sensor is present – that the
door has opened and shut.
46