Professional kitchens ? la Metos Professional kitchens ? la Metos

METOS PRE-WASH SHOWERS
Metos Europe line of pre-rinse showers, WM 500, TM502, WM550 and TM552 are traditional prewash
showers with a handled jet pistol. Europe line pre-wash showers are supported at the top with
a wall fitting. The shower is started by pushing down the handle. A spring returns the handle to its
initial position. WM 500 (wall mounted) and TM502 (table mounted) are pre-rinse showers with a
down spout and a mixer with two grips. WM 550 (wall mounted) and TM552 (table mounted) are
pre-rinse showers with a downspout and a mixer with a long single grip lever.
Metos 6546 pre-wash shower with a
thermoststic mixer and table mounting.
METOS RINSING SHOWER
Metos Code Dimensions mm
Metos 6546 table 4218431 h 1250
Metos 6548 wall 4218495 h 950
The Metos rinsing shower is designed for cleaning the wash tanks of rack conveyor
and flight type dishwashers. Thanks to the 100 cm long extension arm there is no
need to stretch inside the machine. The handle has a quick joint. At the end of the
spray pipe there is a nozzle that spreads the water on to a larger area.
Metos Code
Rinsing shower 2027014
JET CLEANING DEVICE
Metos Code Dimensions mm
Metos WM 500 (wall, two grips) 4218436 h 1050
Metos TM 502 (table, two grips) 4218438 h 1500
Metos WM 550 (wall, single grip) 4218440 h 1050
Metos TM 552 (table, single grip) 4218442 h 1300
Metos 6546 (table mounted) and 6548 (wall mounted) are Top line prewash
showers with a thermostatic mixer and a downspout. Top line showers
start automaticly when the jet pistol is pulled down. The showers are
supported at the top by a wall fitting. The showers come with an 2,5 m
extension hose, which can be attached to the shower using a bayonet catch
(included). By using the extension the showers can be used for cleaning the
washing area.
Hytox spray is a jet cleaning device using tap water, designed for the cleaning and sanitizing of large
hard to clean surfaces. In the washing phase the device dispenses detergent sanitizer into the washing
water. Applications include industrial kitchens, food factories, bakeries, saunas etc. The body is stainless
steel. The device is equipped with a non-return valve, vacuum valve and a closing valve at the end of
the hose. The unit includes approximately 15 m of water hose. The hose has a closing faucet and a
quick joint for attaching extra equipment.
Metos Code Dimensions mm
Hytox Spray 4197238 650x1000x200
Hytox Spray Mobil 4197245 650x1000x200
Brush 4197301 400
Long-handled brush 4197319 1500
Hytox Spray jet cleaning
device is wall-mounted in
the washing area orkitchen.
Metos TM 552
Metos WM 500
Metos rinsing shower for washing and
rinsing the wash tanks of rack conveyor
and flight-type machines.
| 201