Professional kitchens ? la Metos Professional kitchens ? la Metos

30 |
METOS STANDS AND TROLLEYS
Metos equipment trolley
(equipment stand is without
castors)
Metos RN-20 stand with
pull-out shelf and adjustable
feet.
Metos RN20 stand is designed for Karhu RN 20 varimixer, it is also suitable for
small vegetable slicers. A pull-out shelf below top. Sturdy construction and adjustable
feet ensure stable work with the mixer. Stainless steel construction throughout.
Stand and trolley are designed for ergonomic use of small kitchen appliances.
Working on the right level with small vegetable slicers, cutters and varimixers is
very important. Both models have the same construction: flat top facilitates cleaning,
shelf in stand. Construction of stainless steel. Stand with adjustable feet,
trolley with ø 125 mm castors, two of which with brakes.
Metos Code Dimensions mm
Stand RN20 4189766 450x640x530
Trolley 4206228 560x640x650
Stand 4189558 560x640x650
The RG-350 stand and trolley are intended for RG-350 vegetable cutter. In the
front, there is a space for a GN1/1 container. Alternatively the Metos T-450 multipurpose
trolley can be used to take the cutter output. Stand with adjustable feet,
trolley with rubber castors Ø 125 mm, two of which with brakes. Sturdy
construction stainless steel throughout.
Metos Code Dimensions mm
Stand RG-350 4144204 600x450x450
Trolley RG-350 4206235 600x450x450
Metos RG-350
stand for vegetable cutters
METOS STANDS FOR SLICER DISCS
The disc stands are suited for all of the slicer discs of the Metos RG-200-RG-400 vegetable slicers.
The pegs are fixed at a 5° upward angle ensuring that the discs are kept well in place. Each peg can
take two discs. The blade parts don’t touch each other. The discs can be easily and safely be taken
from the stand by lifting them out of the case as the operator can see the whole disc and avoid
touching the sharp blades.
The wall-mounted model is easy to attach to hooks or screws on the wall.
The trolley-mounted model fits Metos service trolleys KV-55 - KV-105, GN rail trolley TGN-14
and shelf trolley HV-75. The stand is pressed against the edge of the shelf and it doesn’t have to be
fixed to the trolley. The long supports of the stand lean against the shelves below and stay firmly in
place.
The shelf trolley has enough space even for the accessories of the largest vegetable cutter RG-400.
Stand for slicer discs Code Dimensions mm
Wall mounted 4 pegs, for 8 discs 4189727 430x625x135
Wall mounted6 pegs, for 12 discs 4189734 430x875x135
Trolley-mounted 4 pegs, for 8 discs 4189741 430x633x135
Trolley-mounted 6 pegs, for 12 discs 4189759 430x884x135
Stock product
Metos RG-350
trolley for vegetable cutters
Trolley-mounted stand for four vegetable cutter
discs mounted on the Metos HV-75 shelf
trolley.