RK06/RK07 Disk Drive User's Manual - Trailing-Edge

Program
Table 5-2 Diagnostic Programs Used inRK611/RK06 or RK611 or RK611/RK07
Disk Subsystem Field Acceptance Tests (Cont)
MAINDEC-II-DZR6E
RK611 Diskless Controller Diagnostic
Part 5
MAINDEC-II-DZR6G
Unibus RK06-RK07 Dual Port Drive
Diagnostic (available Q4, FY78)
MAINDEC-II-DZR6H
Unibus RK06-RK07 Drive Diagnostic
Part 1
MAINDEC-II-DZR61
Unibus RK06-RK07 Drive Diagnostic,
Part 2
Function
Tests multisector data transfers.
Tests midtransfer seeks.
Tests cylinder overflow checking.
Tests NPR transfers to memory.
Tests ECC error detection and correction in I6-and
18-bit modes.
Tests write check in both 16- and I8-bit modes and
forces.
Tests write check errors (no drive is required).
Ensures that port request, port seize, and timeout
function correctly.
Ensures that the release function operates correctly.
Ensures that the timer inhibiting logic operates
correctly.
Ensures that data transfers function correctly
through both parts.
Ensures that the drive can perform all static and
cycle-up tests.
Ensures that the drive can write and read headers
in both 20- and 22-sector formats.
Ensures that the disk can perform seek operations
by doing several seek patterns.
Checks error-detection logic by software error
forcing.
Ensures that the disk is capable of performing read
and write data operations in both 20- and 22-sector
formats.
Performs worst case patterns, spiral writing and
reading, and all offset operations.
5-5
Reports unloading and loading times.