MV BLUEFIN QUALITY MANUAL - Australian Maritime College

Australian Maritime College
APPENDIX 1.12
BRIDGE – SEA TEMPERATURE SYSTEM
The sea temperature display is located starboard side of the steering consol.
To operate:
1. Turn on.
2. Select Degrees Celsius or deg Fahrenheit.
The sensor for this system is located in the Engine room sea water suction therefore will
only give sea surface temperature.
Note: This system is interfaced with the C PLOT chart plotting system and sea
temperature can be displayed on track history.
Note: See settings in C Plot manual.
Append 1.12 - Sea Temp.docx 1
Revised: November 2010