WinCC V6.2 Getting Started - DCE FEL ČVUT v Praze
WinCC V6.2 Getting Started - DCE FEL ČVUT v Praze
WinCC V6.2 Getting Started - DCE FEL ČVUT v Praze
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
07.03 Outputting an Alarm Message Sequence Report<br />
5.6 Step 5: Activating the Project<br />
Manual <strong>WinCC</strong> <strong>V6.2</strong> <strong>Getting</strong> <strong>Started</strong> 105<br />
6ZB5370-0CM02-0BA5<br />
To print out the alarm message sequence report in runtime, click on the<br />
<strong>WinCC</strong> Explorer toolbar button "Activate".<br />
To activate the simulator, go to the Windows taskbar and click on "Start"<br />
"SIMATIC" "<strong>WinCC</strong>" "Tools" "<strong>WinCC</strong> Tag Simulator".<br />
Click on "Edit" "New Tag".<br />
In the dialog box "Tags - Project", select the internal tag "TankLevel" and click<br />
on "OK".<br />
In the tab "Properties", click on the simulation mode "Random".<br />
Enter a minimum value of "0" and a maximum value of "100".<br />
Select the check-box "active".<br />
In the tab "Tags", click on the button "Start Simulation". The table "Tags" will<br />
then display the tag "TankLevel" with its changing values.<br />
In the message window, click on the button "Message List" to view the list of<br />
incoming messages.<br />
Enter appropriate values in the I/O field to also trigger alarm messages of the<br />
monitored tag "AnalogAlarm".<br />
To start the printout of the messages displayed in the message window, click<br />
on the button . The print job you have set up will start.<br />
Illustration 5.5: <strong>WinCC</strong> Project "Qckstart"; Alarm Message Window in Runtime
Change language